An Experimental Investigation of Stress Concentration Factor
نویسندگان
چکیده
In this project, investigation of stress concentration factor is carried out. Some specimens with edge notches, multiple edge notches, and holes are fabricated. While two specimens are hand sawed to produce edge cracks. The stress concentration factor (K) value is compared between the theoretical values found in standard K value chart with our experimental results. Effect of multiple notches is considered and the distribution of stress in hand sawed cracks and notch is compared to deduce the significance of stress concentration factor for the cracks. In the end, some recommendations are made for future investigation. Submitted by Ahmad Loqman Andiyanto Sutandar Julian Chan Hou Kan Chen Guang Ze Chou Shou Kang SCHOOL OF MECHANICAL & PRODUCTION ENGINEERING NANYANG TECHNOLOGICAL UNIVERSITY 2000
منابع مشابه
Stress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads
In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of i...
متن کاملStress Concentration Factor of Single-Layered Graphene Sheets Containing Elliptical Vacancies
In the present study, potential of finite element based molecular structural mechanics (MSM) for evaluating stress concentration factor of single-layered graphene sheets (SLGSs) with elliptical vacancies is successfully addressed. The MSM approach mimics the interatomic forces of the nanostructure by defining an equivalent frame structure containing beam elements. To obtain the mechanical and c...
متن کاملMeasurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole
In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...
متن کاملExperimental Investigation of Rill Creating Hydraulic Conditions in the Marl Rangelands in a Tilting Flume
Generally, the evaluation and assessment of the critical condition of rill formation are useful for a better understanding of soil erosion processes. The inherence characteristics of soils, which have much dynamic variations on the hillslopes and are affected by rill formation, are the soil critical shear stress and soil erodibility factors. This study aims to assess experimental rill incision ...
متن کاملتحلیل تنش ناشی از FOD روی یک پره توربین گاز از جنس سوپرآلیاژ پایه نیکل
Foreign object damage (FOD) occurs when hard, millimeter-sized objects such as gravel or sand and even the pieces of the engine components are ingested into aircraft jet engines. Particles impacting blades produce small indentation craters which can become sites for fatigue crack initiation, severely limiting the lifetime of the blade. In this study, the impact on the edge of a thin plate is in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000