Interior permanent magnet motors with non-overlapping concentrated windings or with integral slot windings for traction application

نویسندگان

  • Pia LINDH
  • Janne NERG
  • Juha PYRHÖNEN
  • Maria POLIKARPOVA
  • Hanne JUSSILA
  • Marko RILLA
چکیده

These Interior permanent magnet machines using integral slot windings or non-overlapping concentrated windings are designed for traction applications. Four direct drive traction motors are analyzed: two 25 kW motors and two 100 kW motors at rated speed of 1000 min. Analytical computations are verified by finite element analysis utilizing Cedrat’s Flux2D. Concentrated tooth coil winding machines can be used also as traction motors and they can be designed to produce reluctance torque. The integral slot wound 25 kW motor has been built and measured. Streszczenie. W pracy przeanalizowano cztery typy silników elektrycznych dla napędów trakcyjnych: dwa 25 kW i dwa – 100 kW z prędkością znamionową 1000 rpm. . Obliczenia analityczne zostały zweryfikowane poprzez symulację komputerową za pomocą pakietu Cedrat Flux 2D. Silnik o mocy 25 kW został wykonany i pomierzony. (Silniki z wewnętrznym magnesem trwałym z nienachodzącymi na siebie uzwojeniami koncentrycznymi dla zastosowań trakcyjnych)

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design Process of Traction Motor having Concentrated Non-overlapping Windings

This study deals with the demands of traction motor design process in where not only the application set some design limits but also the control method set its own boundaries. It is a demanding task to design a traction application in where the driving speed varies from low speed up to field weakening area. Permanent Magnet (PM) synchronous reluctance motors are often used in traction applicati...

متن کامل

Influence of Slot Wedge Material on Permanent Magnet Losses in a Traction Motor with Tooth Coil Windings

Permanent magnet (PM) machines with tooth coil windings are designed and analyzed. We study how the slot wedge material affects the behavior of PM losses when using tooth coil windings, which generate a significant air gap flux density harmonic content. The losses and cogging torques of a surface permanent magnet rotor and an interior permanent magnet rotor are compared in no-load and load situ...

متن کامل

Limitations and Constraints of Eddy-Current Loss Models for Interior Permanent-Magnet Motors with Fractional-Slot Concentrated Windings

This paper analyzes and compares models for predicting average magnet losses in interior permanent-magnet motors with fractional-slot concentrated windings due to harmonics in the armature reaction (assuming sinusoidal phase currents). Particularly, loss models adopting different formulations and solutions to the Helmholtz equation to solve for the eddy currents are compared to a simpler model ...

متن کامل

Analysis and Experimental Verification of Losses in a Concentrated Wound Interior Permanent Magnet Machine

It is well known that additional space harmonics in the air-gap magnetomotive force (MMF) distribution of the concentrated non-overlapping windings (CW) cause additional losses in the machine. This is especially so for machines used for traction applications where the machine requires to operate over its rated speed and frequency. In this paper, the authors investigates losses present in an int...

متن کامل

Limitations and Constraints of Eddy-Current Loss Models for IPM Motors with Fractional-Slot Concentrated Windings

This paper analyzes and compares models for predicting average magnet losses in interior permanent-magnet motors with fractional-slot concentrated windings due to harmonics in the armature reaction (assuming sinusoidal phase currents). Particularly, loss models adopting different formulations and solutions to the Helmholtz equation to solve for the eddy currents are compared to a simpler model ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012