Bearing capacity of shell strip footing on reinforced sand
نویسندگان
چکیده
In this paper, the ultimate load capacities of shell foundations on unreinforced and reinforced sand were determined by laboratory model tests. A series of loading tests were carried out on model shell footing with and without single layer of reinforcement. The tests were done for shell foundation at different shell embedment depth and subgrade density. The results were compared with those for flat foundations without reinforcement. The model test results were verified using finite element analysis using program PLAXIS. The experimental studies indicated that, the ultimate load capacity of shell footing on reinforced subgrade is higher than those on unreinforced cases and the load settlement curves were significantly modified. The shell foundation over reinforced subgrade can be considered a good method to increase the effective depth of the foundation and decrease the resulting settlement. Also the rupture surface of shell reinforced system was significantly deeper than both normal footing and shell footing without reinforcement. The numerical analysis helps in understanding the deformation behavior of the studied systems and identifies the failure surface of reinforced shell footing.
منابع مشابه
Bearing Capacity of Triangular Shell Foundations Adjacent to the Reinforced Sandy Slopes
This paper investigates response of triangular shell strip footings situated on the sandy slope. A series of reduced-scale plate load tests were conducted to cover different parameters including three shell footing types with different apex angles in addition to a flat footing, four different distances for strip footings from the crest of the slope namely “edge distance” and reinforcement statu...
متن کاملSeismic Bearing Capacity of Strip Footings on Pile-Stabilized Slopes
This paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. The resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. This comparison indicates an acceptable agreement. The variants of the study incl...
متن کاملAn experimental and numerical study on the bearing capacity of circular and ring footings on rehabilitated sand slopes with geogrid
This paper presents the results of a series of small-scale model tests and numerical analyses conducted on circular and ring model footings located near geogrid reinforced sand slopes. Layers of geogrid were used as reinforcement. For numerical analyses Finite Element Method (FEM) was used. The effects of reinforcement depth, size, number of layers, and the horizontal distance between reinforce...
متن کاملBehavior of Model Circular Footings on Silty Soils with Cellular Supports
An experimental study of the effect of silt and influence of cell confinement on the bearing capacity of circular footings on silty sand was carried out. Laboratory experiments on clean sand and sand containing silt up to 25 % were performed. Cells with different heights and diameters were used to confine the silty sand. The effect of proportion of silt in sand, cell diameter, cell height and t...
متن کاملStudy of bearing capacity of strip footing resting on reinforced sand
This research was performed to investigate the behavior of strip footing on geosynthetic reinforced sandy soil and to study the effect of different parameters contributing to their performance using laboratory model tests. The parameters investigated in the study included top layer spacing (u), width of reinforcement (b), vertical spacing between layers (s) and number of reinforcement layers (N...
متن کامل