Correction: Investigation of phase composition and nanoscale microstructure of high-energy ball-milled MgCu sample

نویسندگان

  • Zongqing Ma
  • Yongchang Liu
  • Liming Yu
  • Qi Cai
چکیده

Correction In the Methods section of our published article [1], the evolution of grain size and microstrain in the Mg and Cu is estimated using the single-line method of diffraction line-broadening analysis. However, a very important reference is omitted, and this method founder’s publication should be cited here [2]. Moreover, the experimental results contained in this paper were obtained by the first author in cooperation with Dr. U. Welzel, Dr. E. Bischoff and Prof. Dr. E.J. Mittemeijer (all Max Planck Institute for Intelligent Systems) during the stay of the first author in the department of Prof. Dr. Mittemeijer. Thus the authors would like to express our gratitude to them in the Acknowledgements section of this published article [1].

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of phase composition and nanoscale microstructure of high-energy ball-milled MgCu sample

The ball milling technique has been successfully applied to the synthesis of various materials such as equilibrium intermetallic phases, amorphous compounds, nanocrystalline materials, or metastable crystalline phases. However, how the phase composition and nanoscale microstructure evolute during ball milling in various materials is still controversial due to the complex mechanism of ball milli...

متن کامل

AN INVESTIGATION ON REACTIVE SINTERING OF NANO-CRYSTALLINE TiO2 -Al POWDER PREPARED BY MECHANICAL ALLOYING

In this research an ultra-fine grained composite structure consisting of an intermetallic matrix together with dispersed nano-sized Al2O3 obtained via mechanical activation of TiO2 and Al in a high energy ball mill and sintering of consolidated samples. Phase composition and morphology of the milled and sintered samples were evaluated by XRD and SEM techniques Thermal behavior of the powder sa...

متن کامل

Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry

Mechanical alloying of binary and ternary elemental powder mixtures with the nominal compositions of Mg2Ni and Mg(2-x)MnxNi (x= 0, 0.05, 0.10 and 0.15 at. %) were carried out in a planetary ball mill for various milling times of 5, 10, 15, 20, 30 and 60 h. X-ray diffraction and field emission scanning and transmission electron microscopy were used for the characterization of the milled products...

متن کامل

بررسی تغییرات فازی سیلیس و سیلیسیوم به هنگام آسیاب کاری

In the present study phase transformation of silicon and silica during milling in different atmospheres was investigated. The silicon powder was subjected to high energy ball milling in ammonia (25%) atmosphere. The milled powder was subsequently annealed at 1200 ◦C for 1 hour. In another test a mixture of AlN and amorphous silica (micro silica) was subjected to high energy ball milling. The m...

متن کامل

Synthesis and Investigation of Structural, Magnetic and Antibacterial Properties of Calcium-Magnesium Ferrite Nanoparticles by Thermal Treatment Method

This paper reports optical, magnetic and antibacterial properties of calcium-magnesium nanostructure which was prepared by a simple thermal treatment method. Calcination was conducted at temperatures 500 K, The influence of calcination temperature on the degree of crystallinity, microstructure, and phase composition was investigated by different characterization techniques, i.e., X-ray diffract...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 8  شماره 

صفحات  -

تاریخ انتشار 2013