Control of Temperature Using PID Controller
نویسنده
چکیده
Through our project we are showing the control of constant temperature according to the desired value (set point) in a closed loop using PID controller system. For this, we are using a microcontroller, a temperature sensor for sensing the temperature of the closed loops. By using the microcontroller we compare the desired value with current value and it is displayed in the LCD. Also to provide the constant temperature, Fan or Heater is turned on or off according with the variations of current temperature in C from desired setpoint.
منابع مشابه
Intelligence Method for PID Controller Design in AVR System
Designing of a PID controller is a very common method for industrial process control and due to its very simple and efficient function; it is used in a wide variety of industrial applications. PID controller to reduce the steady state error and dynamic response of the system is used. PID controller design is an inevitable problem in setting the coefficients need to try a lot of trial and error,...
متن کاملA Novel Self-tuning Zone PID Controller for Temperature Control via a PLC code
S7-1200 with Tia Portal technology has become a Standard function of distributed controlsystems. Self-Tuning methods belong to Programmable Controllers (PLC) techniques. PLCtechniques contain software packages for advanced control based on mathematical methods. S7-1200 tools are designed to increase the Process Capacity, yield, and quality of products. Most ofthe present time digital industry r...
متن کاملA Closed Loop Control of Quadratic Boost Converter Using PID Controller
This paper presents an implementation of open loop and closed loop control of Quadratic boost converter using PID controller. Quadratic boost converter consists of boost converter and fly back converter driven by a single switch. Quadratic boost converter QBC is designed especially for regulating the DC interface between various micro sources and dc-ac inverter to electricity grid. Quadratic b...
متن کاملA New Intelligent Controller for Parallel DC/DC Converters
In this paper, the immune controller, is used to control the paralleled DC-DC converters. A PID controller is first applied and its coefficient is optimized using an intelligent (PSO) algorithm. Immune controller is then added to PID controller and an immune PID controller is formed. Two methods have been suggested to determine non-linear behavior of immune controller. In the first method, an e...
متن کاملOffline Auto-Tuning of a PID Controller Using Extended Classifier System (XCS) Algorithm
Proportional + Integral + Derivative (PID) controllers are widely used in engineering applications such that more than half of the industrial controllers are PID controllers. There are many methods for tuning the PID parameters in the literature. In this paper an intelligent technique based on eXtended Classifier System (XCS) is presented to tune the PID controller parameters. The PID controlle...
متن کاملQuadrotor Control Using Fractional-Order PI^λ D^μ Control
Quadrotor control has been noted for its trouble as the consequence of the high maneuverability, system nonlinearity and strongly coupled multivariable. This paper deals with the simulation depend on proposed controller of a quadrotor that can overcome this trouble. The mathematical model of quadrotor is determined using a Newton-Euler formulation. Fractional Order Proportional Integral Derivat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016