Circuit Theory Analysis of the input impedance in a Tap Feed Small Normal-Mode Helical Antenna
نویسندگان
چکیده
+ Department of Electrical and Electronic Engineering, National Defense Academy 1-10-20 Hashirimizu Yokosuka 239-8686 Japan, e-mail: [email protected] ++ The Yokohama Rubber Co.Ltd, Hiratsuka-shi, 254-8601, Japan
منابع مشابه
A Small Printed Quadrifilar Helical Antenna for BGAN/GPS Applications
This paper presents an element of a 2×2-element array antenna for Inmarsat BGAN/GPS applications. The element is an axial mode printed quadrifilar helical antenna that has been integrated with a compact feed network to provide sequential phase rotation for circular polarization (CP) radiation. The novel integrated lumped-element feed network is designed to provide a balanced RF power to the fou...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملModern Antenna Design Using Mode Analysis Techniques
In this paper, the modal theory of antennas is re-visited, believing that it brings invaluable information towards facilitating the design of multi-feed multi-band antennas. First, some subtle changes are proposed to enhance the applicability of the theory. Next, using some efficient computational techniques, the proposed formulations are shown to predict, to a very high accuracy, the input imp...
متن کاملExperiment on Triangular Copper-Strip as Impedance Matching for 2
Performance of a helical antenna designed for 2.4-GHz WLAN is experimentally investigated in terms of impedance matching. A section of the helical wire near the antenna feed point is replaced by a simple triangular copper strip. By deploying such technique, impedance matching can be achieved. Overall return loss is below −14 dB across entire WLAN frequency range. Moreover, overall return loss d...
متن کاملDesign of a Very Small Antenna for Metal-Proximity Applications
A radio frequency identification (RFID) system consists of a reader, a writer, and a tag. Filmtype half-wavelength dipole antennas (shown in Fig. 1.1) have been used as tag antennas in many applications [1]. The antenna performance is governed by the electric current in the tag. When the abovementioned antenna is mounted on the surface of a metallic object, the radiation characteristics are ser...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009