SUPPRESSION OF HOMs IN A MULTICELL SUPERCONDUCTING CAVITY FOR CORNELL’S ERL*

نویسنده

  • Valery Shemelin
چکیده

Minimization of power of higher order modes (HOMs) in a multicell cavity was done using derivatives of the parameter defining losses with respect to geometric parameters of the cavity cells. For the Cornell Energy Recovery Linac most dangerous are dipole modes causing beam break-up (BBU). As a start point of optimization the shape with minimal losses at the fundamental mode was taken. Further changing the shape for better propagation of HOMs was done with degradation of the fundamental mode loss parameter ) ( Q GR within 1 % while decrease of the BBU parameter was nearly 3 orders of magnitude. The BBU threshold current tends to be inversely proportional to this parameter.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of a Multi-Cell Superconducting Cavity for the Cornell ERL Main Linac

The Cornell ERL is a proposed x-ray source. Part of the design of this ERL is the design of the main linear accelerator (linac) by the Superconducting Radio Frequency group at Cornell. One of the main components of this linac is a network of 7-cell superconducting cavities. Each cavity is a resonator that accelerates beams with the electric field of the so-called fundamental electromagnetic mod...

متن کامل

BERLinPro 7-CELL SRF CAVITY OPTIMIZATION AND HOMs EXTERNAL QUALITY FACTORS ESTIMATION

The main scope of this work is the optimization of the Superconducting Radio Frequency (SRF) accelerating cavity design for the Berlin Energy Recovery Linac Project (BERLinPro). BERLinPro shall serve as a demonstrator for 100-mA-class Energy Recovery Liniac (ERL) with CW LINAC technology. High-current operation requires an effective damping of Higher-OrderModes (HOMs) of the 1.3 GHz main-linac ...

متن کامل

FINAL DESIGN FOR THE bERLinPro MAIN LINAC CAVITY

The Berlin Energy Recovery Linac Project (bERLinPro) is designed to develop and demonstrate CWLINAC technology for 100-mA-class ERLs. High-current operation requires an effective damping of higher-order modes (HOMs) of the 1.3 GHz main-linac cavities. We have studied elliptical 7-cell cavities based on a modified Cornell ERL design combined with JLab’s waveguide HOM damping approach. This paper...

متن کامل

Superconducting CH structure

The superconducting CH structure is a novel multicell cavity for the acceleration of protons and ions in the low and intermediate energy regime. The CH structure is a cross-bar-type cavity; it is the first superconducting low energy multicell cavity operated in an H mode. A superconducting CH-prototype cavity with 19 gaps at 0:1 has been built and tested successfully. Maximum surface fields of ...

متن کامل

Fiber Laser Oscillator for Cornell’s ERL Project

Cornell’s Energy Recovery Linac (ERL) will create an ultra-bright x-ray synchrotron source with very low beam emittance. In order to measure this emittance, a 50 MHz laser oscillator is needed. This paper describes the design, construction, and characteristics of the laser that was built to meet this need.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009