Hybridizing ZnO Nanowires with Micropyramid Silicon Wafers as Superhydrophobic HighEfficiency Solar Cells

نویسندگان

  • Yan Liu
  • Arnab Das
  • Sheng Xu
  • Ziyin Lin
  • Chen Xu
  • Zhong Lin Wang
  • Ajeet Rohatgi
  • Ching Ping Wong
چکیده

Low conversion efficiency is still the main limiting factor for current solar-cell technologies. A large portion of the energy loss during solar-cell operation is attributed to optical loss, namely the loss of the incoming light by reflection.[1] To reduce the reflection loss, surface texturing and antireflection coatings are the most-commonly used strategies.[2–4] Surface texturing is able to enhance light trapping by multiplying the internal reflections. The industrial standard for the current Si-based photovoltaic (PV) industry process is alkaline fabrication of micrometer-sized pyramid textures. An emerging focus today is the incorporation of nanostructures as surface-texturing materials.[5–8] For example, porous Si and Si nanowires (NWs) have been applied to solar cells to effectively reduce the reflection loss.[9–11] Xiu et al. developed a hierarchical structure through a two-tier texturing method for lower light reflection.[12] Using an antireflection coating (ARC) is another method to reduce light reflectance via destructive interference of the reflected light at the air–ARC–substrate interfaces. A single-layer ARC, such as silicon nitride (SiNx), is the industry standard ARC on Si PVs.[13] A further reduction of reflection can be achieved through a multilayer ARC or fine control of the ARC geometry, which enables a gradual transition of the refraction index from air to the silicon.[14,15] As an outstanding 1D nanostructure, ZnO NWs have a high transparency due to the wide bandgap, appropriate refractive index (n ≈ 2 at 600 nm), and the capability of forming a textured coating on virtually any substrate.[16–19] These characteristics make it an attractive dielectric ARC material for PV applications. By the integration of ZnO NWs with optical fibers and quartz waveguides, an enhancement of the efficiency by a factor of 4–6 has been shown by utilizing a three-dimensional approach.[20,21] The application of ZnO nanostructures on planar Si as an ARC for solar cells has achieved a weighted reflectance

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution

In this paper, the morphology of chemically etched silicon with various concentration  is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...

متن کامل

Nanowire-based multifunctional antireflection coatings for solar cells.

Organic (P3HT/PCBM) solar cells are coated with ZnO nanowires as antireflection coatings and show up to 36% enhancement in efficiency. The improvement is ascribed to an effective refractive index which results in Fabry-Perot absorption bands which match the polymer band-gap. The effect is particularly pronounced at high light incidence angles. Simultaneously, the coating is used as a UV-barrier...

متن کامل

Study the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy

Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...

متن کامل

Hierarchical polymer micropillar arrays decorated with ZnO nanowires.

We introduce a simple and robust method for fabricating hierarchical fibrillar arrays based on polymer micropillar (microPLR) arrays decorated with ZnO nanowires (NWs) on mechanically flexible substrates. The hierarchical fibrillar arrays are fabricated by replica molding of polymer microPLR arrays on microfabricated silicon templates and subsequent solution-based growth of ZnO NWs. Fine contro...

متن کامل

Improving Hybrid Solar Cells: Overcoming Charge Extraction Issues in Bulk Mixtures of Polythiophenes and Zinc Oxide Nanostructures!


 Improving Hybrid Solar Cells: Overcoming Charge Extraction Issues in Bulk Mixtures of Polythiophenes and Zinc Oxide Nanostructures! ! Grant Olson! ! ! Organic photovoltaics (OPVs) have received a great deal of focus in recent years as a possible alternative to expensive silicon based solar technology. Current challenges for organic photovoltaics are centered around improving their lifetimes a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012