Size Effect on Strength of Floating Sea Ice under Vertical Line Load
نویسندگان
چکیده
The size effect on the nominal strength of a floating ice plate subjected to a vertical uniform line load is analyzed. The cracks produced by the load, which are parallel to the load line, are treated as softening inelastic hinges. The problem is one dimensional in the direction normal to the load line, equivalent to a beam on elastic foundation provided by buoyancy of ice in water. The softening moment-rotation diagram of inelastic hinges is simplified as linear and its dependence on structure size ~ice thickness! is based on the energy dissipated by fracture. For thick enough plates, no two hinges ~on one side of the line load! can soften simultaneously, in which case a simple analytical solution is possible. In that case, the load-deflection diagram has multiple peaks and troughs and consists of a sequence of spikes that get progressively sharper as the plate thickness increases. In terms of a dimensionless nominal strength, the effect of a finite fracture process zone at ice surface leads to an up-and-down size effect plot, such that each load peak decreases with the size at first but then asymptotically approaches a rising asymptote of the type (thickness) ~which implies a reverse size effect, caused by buoyancy!. The energy dissipation when the crack in the hinge gets deep causes a strong monotonic size effect, such that the dimensionless troughs between two spikes, in the case of thick enough plate, decrease asymptotically as (thickness). For thin enough plates, more than one hinge soften simultaneously and, in the asymptotic case of vanishing ice thickness, the plasticity solution, which has no size effect, is approached. In the intermediate size range with hinges softening simultaneously, the exact solution is complicated and only approximate formulas for the size effect are possible. They are constructed by asymptotic matching. DOI: 10.1061/~ASCE!0733-9399~2002!128:3~254! CE Database keywords: Floating ice; Vertical loads; Size effect; Sea water; Strength.
منابع مشابه
Scaling of Sea Ice Fracture—Part I: Vertical Penetration
Based on the premise that large-scale failure of sea ice is governed by fracture mechanics, recently validated by Dempsey’s in situ tests of fracture specimens of a record-breaking size, this two-part study applies fracture mechanics and asymptotic approach to obtain approximate explicit formulas for the size effect in two fundamental problems. In the present Part I, the load capacity of a floa...
متن کاملSize Effect in Penetration of Sea Ice Plate
The paper analyzes the vertical penetration of a small object through a floating sea ice plate. The analysis takes into account the fact that the bending cracks reach only through part of the ice plate thickness and have a variable depth profile. The cracks are modeled according to the Rice-Levy nonlinear softening line spring model. The plate-crack interaction is characterized in terms of the ...
متن کاملExperimental Study on the Effect of Crumb Rubber on Shear Strength of Sandy Soil
Nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. Reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. This combination maintains pressure loading capacity and properties in mutual resistant...
متن کاملScaling of Sea Ice Fracture—Part II: Horizontal Load From Moving Ice
Continuing the analysis of fracture size effect in Part I, which was focused on the maximum force in vertical penetration of ice, Part II tackles the problem maximum force that can be applied by a moving ice plate on an obstacle presented by a fixed structure. Based on an asymptotic approach, approximate solutions for are obtained for the size effects of ice thickness, effective structure diame...
متن کاملEffect of Through Stationary Edge and Center Cracks on Static Buckling Strength of Thin Plates under Uniform Axial Compression
Thin plate structures are more widely used in many engineering applications as one of the structural members. Generally, buckling strength of thin shell structures is the ultimate load carrying capacity of these structures. The presence of cracks in a thin shell structure can considerably affect its load carrying capacity. Hence, in this work, static buckling strength of a thin square plate wit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002