Methods for Impedance Matching in RFID Tags: A Review
نویسندگان
چکیده
Yi-Fang Lin; Shu-An Yeh; Hua-Ming Chen; SueWei Chang, "Design of an Omnidirectional Polarized RFID Tag Antenna for Safety Glass Applications," Antennas and Propagation, IEEE Transactions on , vol. 60, no. 10, pp. 4530,4537, Oct. 2012 Reich, M. T. ; Bauer-Reich, C. , "UHF RFID impedance matching: When is a T-match not a T-match?," RFID (IEEE RFID), 2014 IEEE International Conference on , vol. , no. , pp. 23,30, 8-10 April 2014 Bakore, R. ; West, J. C. ; Hutchens, C. ; Ahmed, R. , "Design of a proposed folded dipole antenna for use with an implantable RFID tag at 915 MHz," Antennas and
منابع مشابه
Impedance Matching of Tag Antenna to Maximize RFID Read Ranges & Design Optimization
Radiofrequency Identification (RFID) tags are ever increasing in use, from the monitoring of components to the tracking of produce or livestock during processing & production. They are also widely used in the touch-less technologies seen today in store and payment cards and banking services. With this there has been the ever increasing need to reduce the power required to activate the RFID tag,...
متن کاملImpedance Matching for RFID Tag Antennas
Passive UHF RFID tag consists of a microchip attached to an antenna. Proper impedance match between the antenna and the chip is crucial in RFID tag design. It directly influences RFID tag performance characteristics such as the read range. It is known that an RFID microchip is a nonlinear load whose complex impedance varies with the frequency and the input power. We investigate the effect of us...
متن کاملAntennas of RFID Tags
Radio Frequency Identification (RFID) is a rapidly developing technology which uses RF signals for automatic identification of objects. RFID system generally consists of three components: 1) A small electronic data carrying device called a transponder or tag that is attached to the item to be identified, 2) A reader that communicates with the tag using radio frequency signals, 3) A host data pr...
متن کاملComparison of Different Electromagnetic Solvers for Modeling of Inkjet Printed RFID Humidity Sensor
This paper focuses on the EM modeling of an inkjet printed humidity sensor for UHF RFID systems originally presented in [1]. EM modeling is used to predict the sensor readings as well as to design the tag for certain operating frequencies. Therefore accurate EM modeling is crucial. This paper presents a comparison between three different types of EM solvers in modeling of the humidity sensor; A...
متن کاملDesign and Experimental Evaluation of Modified Square Loop Feeding for UHF RFID Tags
This paper addresses the performance evaluation of a modified square loop antenna design for UHF RFID applications that is excited through a narrow feed line connected to a square loop, an impedance matching network. The square loop dimensions are modified to reach a conjugate impedance matching. A gap is fixed between the feed-lines to link the chip. To achieve impedance matching, the structur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015