Characterisation of natural fibre reinforced PLA foams prepared by supercritical CO 2 assisted extrusion
نویسندگان
چکیده
Natural fibre reinforced polylactic acid (PLA) foams, as potential green replacements for petroleum-based polymer foams, were investigated. Highly porous (ε > 95%) microcellular PLA foams were manufactured by supercritical CO2 assisted extrusion process. To overcome the inherent low melt strength of PLA, epoxyfunctionalized chain extender was applied, while talc was added to improve its crystallization kinetics. The combined application of chain extender and talc effectively promoted the formation of uniform cell structures. The effect of cellulose and basalt fibre reinforcement on the foamability, morphology, structure and mechanical properties of the PLA foams were investigated as well. The addition of 5 wt% natural fibres promoted the cell nucleation, but caused non-uniform distribution of cell size due to the microholes induced by local fibre-matrix debonding. The compression strength of the manufactured basalt fibre reinforced PLA foams reached 40 kPa.
منابع مشابه
Preparation of PMMA/MWNTs Nanocomposite Microcellular Foams by In-situ Generation of Supercritical Carbon Dioxide
Nanocomposites containing poly(methyl methacrylate) (PMMA) and surface functionalized Multi-Walled Carbon Nanotubes (MWNTs) were synthesized. The dispersion of MWNTs in PMMA was characterized using Transmission Electron Microscopy (TEM).The synthesized nanocomposites were successfully foamed using a simple method based on the in-situ generation of supercritical carbon dioxide (CO2</sub...
متن کاملBiocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells.
The aim of this investigation was to test the biocompatibility of three-dimensional bioresorbable foams made of poly(L-lactic acid) (PLA), alone or filled with hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), with human primary osteoblasts, using a direct contact method. Porous constructs were processed by supercritical gas foaming, after a melt-extrusion of ceramic/polymer mixture....
متن کاملPolylactic acid-phosphate glass composite foams as scaffolds for bone tissue engineering.
Phosphate glass (PG) of the composition 0.46(CaO)-0.04(Na(2)O)-0.5(P(2)O(5)) was used as filler in poly-L-lactic acid (PLA) foams developed as degradable scaffolds for bone tissue engineering. The effect of PG on PLA was assessed both in bulk and porous composite foams. Composites with various PG content (0, 5, 10, and 20 wt %) were melt-extruded, and either compression-molded or foamed through...
متن کاملFlexural Properties of Kenaf Fibre Mat Reinforced PLA Composites
The potential use of natural biopolymer composites in a variety of applications that requires biodegradability and better mechanical properties has renewed many researchers interest on the composites. This research involves the analysis of flexural properties for natural fibers specifically kenaffiber mat in a polylactic acid (PLA) matrix (KMPLA). The polylactic acid has been chosen as a matrix...
متن کاملModelling Nucleation and Cell Size During the Continuous Process of Extrusion Assisted by Supercritical CO 2
Polymer foaming with the process of extrusion assisted by supercritical CO2 is based on the injection of a supercritical fluid, in our case carbon dioxide, in a polymer, which has been previously melted in the barrel of an extruder. Upon depressurisation that happens in the die, nucleated bubbles will appear and grow. Modelling the nucleation and growth is important to better understand and mas...
متن کامل