A New Perspective on Texture Evolution
نویسنده
چکیده
Modeling and analysis of texture evolution in polycrystalline materials is a major challenge in materials science. It requires understanding grain boundary or interface evolution at the network level, where topological reconfigurations (critical events) play an important role. In this paper, we investigate grain boundary evolution in a simplified one-dimensional system designed specifically to target microstructural critical event evolution. We suggest a stochastic framework that may be used to model this system and compare predictions of the model with simulations. We discuss limitations and possible extensions of this approach to higher-dimensional cases.
منابع مشابه
The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملEvolution of texture in an ultrafine and nano grained magnesium alloy
The evolution of texture was discussed during the formation of ultra-fine and nano grains in a magnesium alloy severely deformed through accumulative back extrusion (ABE). The microstructure and texture obtained after applying multiple deformation passes at temperatures of 100 and 250°C were characterized. The results showed that after single ABE pass at 100°C an ultrafine/nano grained microstr...
متن کاملThe Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel
In this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % Si non-oriented electrical steel was investigated. For this purpose, all samples were processed through single-stage hot rolling at 1100 ° C and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °C for 35 seconds. Finally, all of them were fu...
متن کاملObstetricians' perspective on the Health Section Evolution Plan in Iran: A Quality-Case Study
Background and Objectives: The Increase of unnecessary caesarean sections has become one of the serious concerns in some health systems. One of the seven packages of the health Reform Plan that was sent to all Iranian medical universities in 2014 was the "Promoting Natural Delivery (vaginal births)," It emphasized the need to reduce cesarean delivery and promot...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کامل