Performance Evaluation of Dual-X CCII designed using Bulk CMOS and Hybrid approach @ 32nm Technology Node
نویسندگان
چکیده
There is a rapid need to explore the design issues of circuits in deep submicron nodes. This paper presents the design and performance analysis of Dual-X CCII, a widely used analog building block using state of the art Si CMOS and a proposed Hybrid (employing both CMOS and CNFET) configuration at 32nm. Current bandwidths port resistances along with power consumption have been chosen as the parameters for comparison. HSPICE simulator has been used to carry out the extensive simulations at a reduced power supply of ±0. 9V
منابع مشابه
Design of a low power high speed 4-2 compressor using CNTFET 32nm technology for parallel multipliers
In this article a low power and low latency 4-2 compressor has been presented. By using modified truth table and Pass Transistor Logic (PTL) a novel structure has been proposed which outperforms previous designs from the frequency of operation view point. The proposed design method has reduced the total transistor count considerably which will lead to reduced power consumption and smaller activ...
متن کاملImpact of CNT’s Diameter Variation on the Performance of CNFET Dual-X CCII
CNFET is generally considered to be one of the most appealing next generation transistors because of its high current carrying capacity and ballistic transport property. This paper investigates the performance analysis of Dual-X Current Conveyor with the CNFET technology, by varying the CNT diameter at 32nm technology node. Current Bandwidth, Input and Output Port resistances of the device alon...
متن کاملDesign of a low power high speed 4-2 compressor using CNTFET 32nm technology for parallel multipliers
In this article a low power and low latency 4-2 compressor has been presented. By using modified truth table and Pass Transistor Logic (PTL) a novel structure has been proposed which outperforms previous designs from the frequency of operation view point. The proposed design method has reduced the total transistor count considerably which will lead to reduced power consumption and smaller activ...
متن کاملLow Voltage Ccii Techniques Composite Transistor and Bulk Driven
To proof low voltage techniques are valid in current conveyor design, Bulk driven and composite transistor (self cascode) techniques are used to get high performance results from CCII in low voltage supply. Conventional operational amplifier circuit from literature was our choice as core of the design. Our Focus with using low voltage techniques is study the frequency characteristics of a CCII ...
متن کاملCurrent Controlled Current Conveyor (CCCII)and Application using 65nm CMOS Technology
Current mode circuits like current conveyors are getting significant attention in current analog ICs design due to their higher band-width, greater linearity, larger dynamic range, simpler circuitry, lower power consumption and less chip area. The second generation current controlled conveyor (CCCII) has the advantage of electronic adjustability over the CCII i.e. in CCCII; adjustment of the X-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012