Measurement of permeability using a bench-top centrifuge
نویسنده
چکیده
The commonly used British Standard constant head triaxial permeability test for testing of finegrained soils is relatively time consuming. A reduction in the required time for soil permeability testing would provide potential cost savings to the construction industry, particularly in the construction quality assurance of landfill clay liners. The purpose of this paper is to evaluate an alternative approach of measuring permeability of fine-grained soils benefiting from accelerated time scaling for seepage flow when testing specimens in elevated gravity conditions provided by a centrifuge. As part of the investigation, an apparatus was designed and produced to measure water flow through soil samples under conditions of elevated gravitational acceleration using a small desktop laboratory centrifuge. A membrane was used to hydrostatically confine the test sample. A miniature data acquisition system was designed and incorporated in the apparatus to monitor and record changes in head and flow throughout the tests. Under enhanced gravity in the centrifuge, the flow through the sample was under ‘variable head’ conditions as opposed to ‘constant head’ conditions as in the classic constant head permeability tests conducted at 1g. A mathematical model was developed for analysis of Darcy’s coefficient of permeability under conditions of elevated gravitational acceleration and verified using the results obtained. The test data compare well with the results on analogous samples obtained using the classical British Standard constant head permeability tests.
منابع مشابه
Revisiting the Drainage Relative Permeability Measurement by Centrifuge Method Using a Forward-backward Modelling Scheme
Measurement of drainage relative permeability by the centrifuge method was first introduced by Hagoort. It has been shown that capillary end effects can cause errors in the measurements if a minimum rotational speed is not honored. To determine the min ! , we propose maintaining the value of capillary-gravity number, cg N , to be of the order of 10 -2 or smaller, at which the capillary end effe...
متن کاملExtracting Pore Throat Size and Relative Permeability from Mri Based Capillary Pressure Curves
Capillary pressure (Pc) curves acquired using the Magnetic Resonance Imaging (MRI) technique, call GIT-CAP, have 70-100 data points. This extra data, when compared with traditional porous plate or centrifuge techniques, allows for the interpretation of more information from the Pc curve. In particular, the pore throat size and relative permeability can be extracted. The pore throat size can be ...
متن کاملLaboratory scaledown of protein purification processes involving fractional precipitation and centrifugal recovery.
The ability to predict the performance of large-scale processes is central to the rapid development of successful operations at the pilot and industrial scale. In this article, we examine the operation, at laboratory scale, of precipitation reactors and centrifuges for protein precipitate recovery and dewatering and how they might best mimic large-scale reactors and centrifuges, in this case, a...
متن کاملEffectiveness of Bench Top Non-Vacuum Autoclaves on Dental Turbine Chamber Sterilization
Introduction: Dental turbine chamber is a suitable reservoir for living microorganisms, so chamber sterilization is necessary for reducing cross contamination risk. On the other hand, in non-vacuum autoclaves, steam penetration into turbine chamber is doubtful, while they are still in use in dental clinics. In this study, performance of small non-vacuum autoclave in turbine chamber sterilizatio...
متن کامل