Application of Hardware In the Loop simulation in Power Electronics Courses
نویسندگان
چکیده
In this paper a ”hardware in the loop” design concept as an experimental part of power electronics courses is considered. Hardware in the loop method utilizes plant simulation model in connection with real standard target controller. An low cost virtual test bed for educational purposes is developed and tested. The used general purpose equipment can be utilized for controller implementation as well as virtual plant model. Simulations are performed under different conditions and results are presented graphically using virtual instruments on the designed front panels.
منابع مشابه
Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources
In this paper, a hardware in the loop simulation (HIL) is presented. This application is purposed as the first step before a real implementation of a Generalized Predictive Control (GPC) on a micro-grid system located at the Military University Campus in Cajica, Colombia. The designed GPC, looks for keep the battery bank State of Charge (SOC) over the 70% and under the 90%, what ensures the bes...
متن کاملImplementation of Identical Spiral Square Inductive Coils for Wireless EV Battery Charging Application
In recent years, the popularity of wireless inductive power transfer (WIPT) system for electric vehicle battery charging (EVBC) is always ever-increasing. In the WIPT inductively coupled coil structure is the heart of the system and the mutual inductance (MI) between the coupled coils is the key factor for effective power transfer. This paper presents the analysis of mutual inductance between t...
متن کاملFrom simulation to hardware testing: a low-cost platform for power-hardware-in-the-loop experiments
The paper describes a concrete experience in designing a platform for testing power electronics equipments during the prototyping phase. The experience is based on the Virtual Test Bed platform and shows a complete example of the path from specification to hardware testing for a simulation-based design approach. The paper in particular focuses on the interfaces challenges created by the applica...
متن کاملModified 32-Bit Shift-Add Multiplier Design for Low Power Application
Multiplication is a basic operation in any signal processing application. Multiplication is the most important one among the four arithmetic operations like addition, subtraction, and division. Multipliers are usually hardware intensive, and the main parameters of concern are high speed, low cost, and less VLSI area. The propagation time and power consumption in the multiplier are always high. ...
متن کاملDesign of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کامل