The International Linear Collider beam dumps
نویسندگان
چکیده
The International linear collider (ILC) is a very complicated and expensive project. One aspect of key importance is the main beam dumps, which are required to safely dispose of the high power ILC beams. The work on such dumps was started at the SLC, albeit at much lower power, and continued as part of the TESLA project. However, much more work is needed to obtain satisfactory beam dumps for the ILC. We shall now review the baseline and alternative beam dumps designs.
منابع مشابه
The Layout of the photon collider at the ILC ∗
One of the interaction regions at the linear colliders should be compatible both with e + e − and γγ,γe modes of operation. In this paper, the differences in requirements and possible design solutions are discussed. The photon collider (γγ, γe) is being considered as an " option " in the International Linear Collider (ILC) project [1–3], while e + e − collisions are " baseline ". In reality, th...
متن کاملImplementation of Dynamic Misalignments and Luminosity Stabilization
To fully characterize the luminosity performance of a linear collider, it is important to simulate the effects of ground motion as well as the beam-beam feedback and other stabilization systems planned to compensate for that motion. The linear collider simulation codes have recently been extended to include both ground motion models and stabilization systems to support the work of the Internati...
متن کاملIon Effects in the Electron Damping Ring of the International Linear Collider*
Ion-induced beam instabilities and tune shifts are critical issues for the electron damping ring of the International Linear Collider (ILC). To avoid conventional ion trapping, a long gap is introduced in the electron beam by omitting a number of successive bunches out of a long train. However, the beam can still suffer from the fast ion instability, driven by ions that last only for a single p...
متن کاملPower Saving Optimization for Linear Collider Interaction Region Parameters*
Optimization of Interaction Region parameters of a TeV energy scale linear collider has to take into account constraints defined by phenomena such as beam-beam focusing forces, beamstrahlung radiation, and hour-glass effect. With those constraints, achieving a desired luminosity of about 2E34 would require use of e+ebeams with about 10 MW average power. Application of the “travelling focus” reg...
متن کاملComparison of the Tesla, Nlc and Clic Beam-collimation System Performance∗
This report describes studies performed in the framework of the Collimation Task Force organized to support the work of the second International Linear Collider Technical Review Committee. The post-linac beam-collimation systems in the TESLA, JLC/NLC and CLIC linear-collider designs are compared using the same computer code under the same assumptions. Their performance is quantified in terms of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006