On the Feasibility to Investigate Point Defects by Advanced Electron Microscopy

نویسنده

  • C. KISIELOWSKI
چکیده

Transmission Electron Microscopy evolves rapidly as a primary tool to investigate nano structures on a truly atomic level. Its resolution reaches into the sub Ångstrom region by now. Together with a better correction of lens aberrations, sensitivities are drastically enhanced. Utilizing advanced electron microscopes, it is feasible to promote experiments that aim to detect single atoms. This enables local investigations of non-stoichiometry. This paper reviews the current state-of-the–art.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell

Using flawless components are important for a proper material selection and best working conditions to achieve the best performance of solid oxide fuel cells (SOFCs). Tape casting is the most used process for the fabrication of SOFC parts, especially anode and electrolyte due to its advantages regarding the other processes. In this study, the effect of slurry composition and milling time were s...

متن کامل

Optimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials

The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...

متن کامل

Optimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials

The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...

متن کامل

2.3 Finding (point) Defects in (nitride-based) Device Structures using TEM Imaging Techniques

Within the last five years material characterization through transmission electron microscopy (TEM) imaging has advanced to a point where identification of single defects is attainable. Novel capabilities of device structure characterization is demonstrated here. The degradation of AlGaN/GaN:Si HEMTs is investigated, defects identified and contamination elements localized.

متن کامل

Preparation of Kissiris/TiO2/Fe3O4/GOx Biocatalyst: Feasibility study of MG decolorization

Titanium dioxide (TiO2) and Fe3O4 magnetite particles were coated on spherical Kissirises; glucose oxidase (GOx) enzyme was immobilized on Kissiris/Fe3O4/TiO2 by physical adsorption. This catalyst was analyzed by a scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive X-ray (EDX) measurements. The performance of the prepared biocatalyst in the...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003