Dataset demonstrating the modeling of a high performance Cu(In,Ga)Se2 absorber based thin film photovoltaic cell
نویسندگان
چکیده
The physical data of the semiconductor materials used in the design of a CIGS absorber based thin film photovoltaic cell have been presented in this data article. Besides, the values of the contact parameter and operating conditions of the cell have been reported. Furthermore, by conducting the simulation with data corresponding to the device structure: soda-lime glass (SLG) substrate/Mo back-contact/CIGS absorber/CdS buffer/intrinsic ZnO/Al-doped ZnO window/Al-grid front-contact, the solar cell performance parameters such as open circuit voltage [Formula: see text], short circuit current density [Formula: see text], fill factor [Formula: see text], efficiency [Formula: see text], and collection efficiency [Formula: see text] have been analyzed.
منابع مشابه
On the Role of Na and Modificationsto Cu(In,Ga)Se2 Absorber MaterialsUsing Thin-MF (M=Na, K, Cs)Precursor Layers
The growth and characterization of Cu(In,Ga)Se2 polycrystalline thin films under the presence of thin-MF (M=Na, K, Cs) precursor layers is presented. Some electrical, structural, and electronic absorber properties due to the presence of such Group Ia impurities are quantified along with their influence in device performance. We present a growth model for the role of Na in Cu(In,Ga)Se2 that attr...
متن کاملDelft University of Technology Quenching Mo optical losses in CIGS solar cells by a point contacted dual-layer dielectric spacer A 3-D optical study
A 3-D optical modelling was calibrated to calculate the light absorption and the total reflection of fabricated CIGS solar cells. Absorption losses at molybdenum (Mo) / CIGS interface were explained in terms of plasmonic waves. To quench these losses, we assumed the insertion of a lossless dielectric spacer between Mo and CIGS, whose optical properties were varied. We show that such a spacer wi...
متن کاملIUPAC Development of new buffer layers for Cu ( In , Ga ) Se 2 solar cells * Byung
Recent progress in the field of Cu(In,Ga)Se2 (CIGS) thin film solar cell technology is briefly reviewed. New wide-bandgap Inx(OOH,S)y and ZnSx(OH)yOz buffers for CIGS solar cells have been developed. Advances have been made in the film deposition by the growth process optimization that allows the control of film properties at the microand nanolevels. To improve the CIGS cell junction characteri...
متن کاملOne-Step Electrodeposited Cu-In-Ga Thin Films and Cu(In,Ga)Se2 Absorber Synthesis for Solar Cells
Cu-In-Ga electrodeposition on Mo substrate is carried out in acidic aqueous media. Subsequent selenization leads to Cu(In,Ga)Se2 absorber for thin film solar cells. First, conditions to achieve onestep Cu-In-Ga electrodeposition are analysed. Then, Cu-In and CuGa systems are studied. Cu-In electrodeposition is realized under diffusion-control conditions. For Cu-Ga system, first Cu(II) diffusion...
متن کاملFabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کامل