Reactive silver inks for patterning high-conductivity features at mild temperatures.

نویسندگان

  • S Brett Walker
  • Jennifer A Lewis
چکیده

Reactive silver inks for printing highly conductive features (>10(4) S/cm) at room temperature have been created. These inks are stable, particle-free, and suitable for a wide range of patterning techniques. Upon annealing at 90 °C, the printed electrodes exhibit an electrical conductivity equivalent to that of bulk silver.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation of solid silver nanoparticles for inkjet printed flexible electronics with high conductivity.

Silver nanoparticles (NPs) which could be kept in solid form and were easily stored without degeneration or oxidation at room temperature for a long period of time were synthesized by a simple and environmentally friendly wet chemistry method in an aqueous phase. Highly stable dispersions of aqueous silver NP inks, sintered at room temperature, for printing highly conductive tracks (∼8.0 μΩ cm)...

متن کامل

Transparent conductive grids via direct writing of silver nanoparticle inks.

Transparent conductive grids are patterned by direct writing of concentrated silver nanoparticle inks. This maskless, etch-free patterning approach is used to produce well-defined, two-dimensional periodic arrays composed of conductive features with center-to-center separation distances of up to 400 µm and an optical transmittance as high as 94.1%.

متن کامل

Silver Ink Formulations for Sinter-free Printing of Conductive Films

Inkjet printing offers an attractive method for the deposition of metal interconnects in electronic systems and enables a low-cost, environmentally friendly route to manufacture. However, virtually all current metal inkjet processes require post-deposition sintering treatments to achieve the optimum electrical conductivity, because the growth mechanism involves coalescence of discrete nanoparti...

متن کامل

Spray-coated nanoscale conductive patterns based on in situ sintered silver nanoparticle inks

Nanoscale patterns with high conductivity based on silver nanoparticle inks were fabricated using spray coating method. Through optimizing the solution content and spray operation, accurate nanoscale patterns consisting of silver nanoparticles with a square resistance lower than 1 Ω /cm2 were obtained. By incorporating in situ sintering to substitute the general post sintering process, the time...

متن کامل

Electrical conductivity anomaly in silver vadadium-tellurite glasses at temperatures higher than a characteristic temperature: evidence for an ionic-nonadiabatic polaronic mixed conduction

Electrical conduction anomaly was observed in the mixed ion-polaron regime for xAg2O-40TeO2-(60-x)V2O5 glassy system with 0 ≤x≤ 50 mol%, which were prepared by common melt quenching method. For the understudied glasses, the temperature dependence of dc electrical conductivity was measured from a characteristic temperature to 380 K, which certified their semiconducting nature. The measured condu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the American Chemical Society

دوره 134 3  شماره 

صفحات  -

تاریخ انتشار 2012