Modelling the Effects of Reaction Temperature and Flow Rate on the Conversion of Ethanol to 1,3-Butadiene
نویسندگان
چکیده
منابع مشابه
FULL PAPER Ethanol to 1,3-butadiene conversion using ZrZn-containing MgO- SiO2 systems prepared by co-precipitation and effect of catalyst acidity modification
The conversion of ethanol to 1,3-butadiene (1,3-BD) has been investigated over ZrO2 and ZnO containing magnesia silica oxides prepared by co-precipitation method at different Mg-to-Si molar ratios. The effect of reaction temperature and ethanol flow rate was investigated. The catalyst acidity was modified through the addition of alkali metals (Na, K and Li) to the final materials. Catalysts wer...
متن کاملTwo-level Full Factorial Design for Selectivity Modeling and Studying Simultaneous Effects of Temperature and Ethanol Concentration in Methanol Dehydration Reaction
Using surface analysis, simultaneous effects of temperature (260-380ºC) and ethanol concentration (0-1%) on dimethyl ether (DME) selectivity, yields of hydrocarbon and DME, and methanol conversion were investigated in methanol dehydration reaction over γ-Al2O3 catalyst. Methanol conversion and yield of hydrocarbon/DME were found to be significantly affected by temperature and the temperature-et...
متن کاملSimulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit
Simulation of a process and analysis of its resulting data in both dynamic and steady-state conditions are fundamental steps in understanding the process in order to design and efficient control of system as well as implementing operational cost reduction scheme. In the present paper, steady and unsteady state simulation of Amir Kabir1, 3 butadiene purification units has been done by using Aspe...
متن کاملModelling the catalyst fragmentation pattern in relation to molecular properties and particle overheating in olefin polymerization
A two-dimensional single particle finite element model was used to examine the effects of particle fragmental pattern on the average molecular weights, polymerization rate and particle overheating in heterogeneous Ziegler-Natta olefin polymerization. A two-site catalyst kinetic mechanism was employed together with a dynamic two-dimensional molecular species in diffusion-reaction equation. The i...
متن کاملبررسی مشخصه های حلال NMP در فرآیند جداسازی برش C4 به روش تقطیر استخراجی
1,3-Butadiene, BD is produced from C4-cut by extractive distillation. The separation of 1,3-Butadiene from C4-cut is not possible through the conventional distillation processes, because several mixtures have consisted of close boiling points constituents and make azeotrope. The BASF extraction distillation process in BD unit of Jam and Amirkabir Petrochemical Company improves the relative vola...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017