A New Family of Styrene/Diene Rubbers
نویسندگان
چکیده
منابع مشابه
Novel Bifunctional Additive for Rubbers: Cyclic Butylene Terephthalate Oligomer
In this paper the effect of a novel bifunctional additive [cyclic butylene terephthalate (CBT)] was investigated on the rheological, curing and mechanical properties of natural rubber (NR), styrene butadiene rubber (SBR), oil extended styrene butadiene rubber (oSBR), acrylonitrile butadiene rubber (NBR) and ethylene propylene diene rubber (EPDM). Results showed, that CBT acted as an effective l...
متن کاملSebs (styrene - Ethylene - Butadiene - Styrene) Analysis through Injection Reprocessing and Rheological Characterization
Thermoplastic rubbers are materials that combine the characteristics of good processability of thermoplastics with the physical properties of vulcanized rubber. SEBS is a SBS which has been subjected to a hydrogenation process, through the polybutadiene chain is eliminated. This new rubber has a high resistance to environment, temperature, UV radiation, etc. without losing the properties of a t...
متن کاملStudy on Processing and Performance Characteristics of Compouns Based on Emulsion / Solution Sbrs
Styrene Butadiene Rubbers (SBRs) are among the most useful synthetic rubbers which can be produced by two different methods of polymerization: emulsion and solution. These two polymerization methods lead to different final properties. In general, SBRs produced by the solution method (S-SBRs) have narrower Molecular Weight Distribution (MWD), higher content of cis-1,4 structure and lower glass t...
متن کاملAnionic Vinyl Polymerization
The concept of anionic polymerization was first developed by Ziegler and Schlenk in early 1910. Their pioneering work on the polymerization of diene initiated with sodium metal set the stage for the use of alkali metal containing aromatic hydrocarbon complexes as initiators for various α-olefins. In 1939, Scott and coworkers used for the first time the alkali metal complexes of aromatic hydroca...
متن کاملModification of Nylon 6 , 6 1
Nylon 6, 6 is regarded as tough and ductile materials since it exhibit high tensile elongation to break and high drop weight impact strengths. However, under conditions of stress concentration such as in the presence of sharp notches or cracks, polyamides exhibit brittle failure. This property, evaluated as notched Izod or Charpy impact tests, indicates that unmodified polyamides exhibit relati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017