Atomic-scale surface demixing in a eutectic liquid BiSn alloy.

نویسندگان

  • Oleg G Shpyrko
  • Alexei Yu Grigoriev
  • Reinhard Streitel
  • Diego Pontoni
  • Peter S Pershan
  • Moshe Deutsch
  • Ben Ocko
  • Mati Meron
  • Binhua Lin
چکیده

Resonant x-ray reflectivity of the surface of the liquid phase of the Bi(43)Sn(57) eutectic alloy reveals atomic-scale demixing extending over three near-surface atomic layers. Because of the absence of an underlying atomic lattice which typically defines adsorption in crystalline alloys, studies of adsorption in liquid alloys provide unique insight on interatomic interactions at the surface. The observed composition modulation could be accounted for quantitatively by the Defay-Prigogine and Strohl-King multilayer extensions of the single-layer Gibbs model, revealing a near-surface domination of the attractive Bi-Sn interaction over the entropy.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface crystallization in a liquid AuSi alloy.

X-ray measurements reveal a crystalline monolayer at the surface of the eutectic liquid Au82Si18, at temperatures above the alloy's melting point. Surface-induced atomic layering, the hallmark of liquid metals, is also found below the crystalline monolayer. The layering depth, however, is threefold greater than that of all liquid metals studied to date. The crystallinity of the surface monolaye...

متن کامل

X-ray reflectivity studies of liquid metal and alloy surfaces

Surface-induced atomic layering at the liquid/vapor interface in liquid metals has been observed using x-ray reflectivity on sputtered clean surfaces under ultrahigh vacuum conditions. A well-defined quasi-Bragg peak is obtained for surfaces of elemental Ga and a Ga-In alloy at large wave vectors qz;2.3–2.5 Å . These results are an unambiguous indication of atomic layering with an interlayer sp...

متن کامل

Liquation and re-solidification in thermo-mechanically affected zone during friction stir spot welding of AZ91 alloy

The present research aims to study the liquation and re-solidification of liquid during friction stir spot welding of AZ91 alloy. Although friction stir spot welding is a solid-state process, the presence of Mg17Al12 intermetallic compounds results in liquation during the welding process. In this study, friction stir spot welding was performed with a tool rotational speed of 2500 rev/min and a ...

متن کامل

The Influence of Liquid Surface Segregation on the Pitting Corrosion Behavior of Semi-Solid Metal High Pressure Die Cast Alloy F357

Semi-solid metal processing results in liquid segregation at the surface of the components. The pitting behavior of this surface layer of semi-solid metal processed alloy F357 was compared with the centre (or bulk) of cast plates in 3.5% NaCl aqueous solution. It is shown that pitting attack occurs preferentially in the eutectic regions at the interface between silicon particles and the alpha p...

متن کامل

Effects of microstructure on native oxide scale development and electrical characteristics of eutectic Cu–Cu6La alloys

A combination of electron microscopy, focused ion beam and conductive atomic force microscopy techniques have been used to study the microstructure, oxide scale development, and electrical behavior of a Cu–9 at.% La alloy. The as-cast alloy exhibits a eutectic microstructure comprising 30 vol.% Cu rods in a Cu6La matrix. The eutectic colonies exhibit a singular orientation relationship with [01...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Physical review letters

دوره 95 10  شماره 

صفحات  -

تاریخ انتشار 2005