Heat Forging Analysis Method on Blank Consisting of Two Metals
ثبت نشده
چکیده
منابع مشابه
New Forging Method for the Door Frame of Wind Turbine Tower
This research introduces an advanced forging method to produce the door frame of the wind turbine tower. The advantage of the new forging method is the increase of raw material utilization ratio and the energy saving. In the conventional method, the door frame is hot forged with a hydraulic press and machined out lots of material because of the big difference between forging shape and final mac...
متن کاملM. KUKURYK*,# ANALYSIS OF DEFORMATION AND MICROSTRUCTURAL EVOLUTION IN THE HOT FORGINGOF THE Ti-6Al-4V ALLOY ANALIZA ODKSZTAŁCENIA I PROGNOZOWANIA MIKROSTRUKTURY W PROCESIE KUCIA STOPU Ti-6Al-4V NA GORĄCO
A majority of high-strength constructional elements of titanium alloys are manufactured by hot plastic working methods, chiefly by open die forging or die forging. Most often, β α + two-phase titanium alloys are used, which are characterized by high relative strength, good hightemperature creep resistance (up to 450°C), high fatigue strength under corrosive conditions, corrosion resistance in m...
متن کاملAn Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene
Abstract Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...
متن کاملNumerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear
The purpose of this research is to analyze the forging of bevel gears based on conventional forging method with material number 1.7131 with finite element method by means of SUPER FORGE software and to compare it with experimental cold orbital forging results.After doing simulation of conventional forging and obtaining press tonnage due to orbital forging method with DEFORM software, orbital fo...
متن کاملAn Upper Bound Approach for Analysis of Hydroforming of Sheet Metals
Considering a kinematical velocity admissible field, the upper bound method has beenused for predicting the amount of pressure in hydroforming of sheet metals. The effects of workhardening, friction and blank size have been considered in pressure prediction. Also the effect ofsheet thickness variation has been considered in the present work formulations. The relation betweenpressure and punch s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014