A Note on Anti-plane Shear for Compressible Materials in Finite Elastostatics

نویسنده

  • JAMES K. KNOWLES
چکیده

This note gives a necessary and sufficient condition that a compressible, isotropic elastic material should admit non-trivial states of finite anti-plane shear. One of the simplest classes of deformations of solids is that of anti-plane shear, in which each particle of a cylindrical body undergoes a displacement parallel to the generators of the cylinder and independent of the axial position of the particle. Problems involving deformations of this kind are often helpful in the study of qualitative effects whose analogues in more elaborate deformations such as plane strain may be much Jess accessible because of technical complexities. Because of their utility in this respect, anti-plane shear fields have proved to be especially instructive in crack problems of the type arising in fracture mechanics. (Examples may be found in the references given in [6]). In the linearized theory of elasticity, non-trivial equilibrium fields of anti-plane shear are possible in the absence of body forces for any homogeneous, isotropic material. In contrast, the exact theory of anti-plane shear in finite elasticity is marred slightly by the fact that not all such materials have this property. This inference is implicit in the work of Adkins [I] for incompressible elastic materials. (See Section 2.20 of [4] for a summary of the analysis in [!].) Much of his study, which appears to have been the first detailed investigation of anti-plane shear in finite elastostatics, is limited to the so-called Mooney material which does admit non-trivial states of anti-plane shear and which is of especial interest in the theory of rubber elasticity. In [6] a necessary and sufficient condition that an incompressible, isotropic elastic material should sustain non-trivial states of finite anti-plane shear was given in terms of the strain energy density characteristic of the material. In this note an analogous condition is established for compressible materials. © Copyright Australian Mathematical Society 1977 Copyright. Apart from any fair dealing for scholarly purposes as permitted under the Copyright Act, no part of this JOURNAL may be reproduced by .any process without written permission from the Treasurer of the Australian Mathematical Society.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Composite Finite Difference Scheme for Subsonic Transonic Flows (RESEARCH NOTE).

This paper presents a simple and computationally-efficient algorithm for solving steady two-dimensional subsonic and transonic compressible flow over an airfoil. This work uses an interactive viscous-inviscid solution by incorporating the viscous effects in a thin shear-layer. Boundary-layer approximation reduces the Navier-Stokes equations to a parabolic set of coupled, non-linear partial diff...

متن کامل

Impact of Integration on Straining Modes and Shear-Locking for Plane Stress Finite Elements

Stiffness matrix of the four-node quadrilateral plane stress element is decomposed into normal and shear components. A computer program is developed to obtain the straining modes using adequate and reduced integration. Then a solution for the problem of mixing straining modes is found. Accuracy of the computer program is validated by a closed-form stiffness matrix, derived for the plane rectang...

متن کامل

Material tailoring and universal relations for axisymmetric deformations of functionally graded rubberlike cylinders and spheres

We find the spatial variation of material parameters for pressurized cylinders and spheres composed of either an incompressible Hookean, neo-Hookean, or Mooney–Rivlin material so that during their axisymmetric deformations either the in-plane shear stress or the hoop stress has a desired spatial variation. It is shown that for a cylinder and a sphere made of an incompressible Hookean material, ...

متن کامل

Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors

Composite steel/concrete beams may buckle in hogging bending regions. As the top flange of I-beam in that arrangement is restricted from any translational deformation and twist, the web will distort during buckling presenting a phenomenon often described as restricted distortional buckling. There are limited studies available in the literature of restricted distortional buckling of composite st...

متن کامل

Bifurcations of Compressible Pressure- Sensitive Materials in Plane Strain Tension and Compression

BIFURCATIONS, including shear band and diffuse geometric modes, arc analysed for plane strain deformation of a rectangular slab subject to a constant lateral confining stress. The response of the slab material is characterized by an incrementally linear constitutive relation that allows for the possibility of volume change accompanying shear deformation, pressure dependence and deviations from ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014