Low-latency Hard Real-Time Communication over Switched Ethernet
نویسندگان
چکیده
Ethernet, the most widely used commodity network, increasingly moves toward switches as implementation technology thus replacing busses. This allows to use traf£c shaping techniques to implement hard real-time distributed systems on commodity networks. However, because Ethernet switches lack build-in policing features, nodes connected by Switched Ethernet need to be cooperative. Although the theory behind traf£c shaping for real-time communication is known for some time, it has not been considered for Ethernet so far. In this paper we present the implementation of traf£c shaping on Switched Ethernet technology. We make thorough experiments to understand the cost and practical limits of using Fast and Gigabit Ethernet for hard real-time communication. We do measurements to analyze properties of switches and delays that we can achieve using these switches. We further analyze the in¤uences of non real-time Linux nodes sharing the network.
منابع مشابه
Support Industrial Hard Real-Time Traffic with Switched Ethernet
This paper presents a simple and efficient switched Ethernet communication protocol for industrial hard real-time LAN applications. The network is founded with end nodes and a switch, and hard real-time communication is handled by software added between the Ethernet protocols and the TCP/IP suites. We established a virtual link of the source and destination node by applying admission control ba...
متن کاملVoIP drives realtime Ethernet
-The real time properties of traditional Ethernet are poor. The end-to-end latency through an Ethernet network based on thin Ethernet (coax 10BASE-2) or hubs (10BASE or 100BASE) depends on the network load. The non deterministic property of the Carrier Sense Multiple Access – Collision Detection (CSMA/CD) scheme has been the main argument against Ethernet as the communication solution for appli...
متن کاملUsing Switched Ethernet for Hard Real-Time Communication
Previous results on traf£c shaping on Switched Ethernet technology demonstrate its practicability and effectiveness for hard real-time communication [8]. The application-toapplication delays on a 5-node network were reported to be less than a millisecond with both Fast Ethernet and Gigabit Ethernet technology with a link utilization of 93% and 49%. In this paper we describe directions of resear...
متن کاملSwitched Real-Time Ethernet in Industrial Applications - Asymmetric Deadline Partitioning Scheme
This paper presents work on a switched Ethernet network extended to allow for periodic real-time traffic, using earliest deadline first (EDF) scheduling. A scheme of asymmetrically dividing deadlines of real-time channels between the in and outgoing links to/from the switch is proposed (ADPS). The result of the simulations of setting up RT channels over a full-duplex switched Ethernet network i...
متن کاملSwitched Real-Time Communication for Industrial Applications
An important trend in the networking community is to involve more switches in the networks (e.g., LAN, Local Area Networks) and pure switched-based networks becomes more and more common. At the same time, the industrial communication community has a strong will to adapt LAN technology (e.g. Ethernet) for use in industrial systems. The involvement of switches does not only increase the performan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004