Effects of Carbonization Temperature and Component Ratio on Electromagnetic Interference Shielding Effectiveness of Woodceramics
نویسندگان
چکیده
Woodceramics were fabricated in a vacuum through carbonization of wood powder impregnated with phenol formaldehyde (PF) resin. The effects of carbonization temperature and mass ratio of wood/resin on electromagnetic interference (EMI) shielding effectiveness (SE) and morphology of woodceramics were explored. The PF resin made wood cell walls have the characteristics of glassy carbon. Wood axial tracheid and ray cells were filled with more glassy carbon by increasing addition of PF resin. Moreover, the increase of carbonization temperature was beneficial to improving SE. Woodceramics (mass ratio 1:1) obtained at 1000 °C presented a medium SE level between 30 MHz and 1.5 GHz.
منابع مشابه
Effect of carbon black content on the microwave absorbing properties of CB/epoxy composites
To prevent serious electromagnetic interference, a single-layer and double layer wave-absorbing coating employing complex absorbents composed of carbon black with epoxy resin as matrix was prepared. The morphologies of carbon black /epoxy composites were characterized by scanning electron microscope and atomic force microscope, respectively. The carbon black particles exhibit obvious polyarom...
متن کاملبررسی تاثیر عوامل ساختاری بر اثربخشی حفاظتی سپرهای الکترومغناطیس دولایه
Introduction: Nowadays, demand for protection against radar radiation using electromagnetic shielding is on the rise. Double-layer or multilayer shielding were devised in order to improve the single layer electromagnetic shielding properties. In this study, we tried to prepare a new double-layers electromagnetic shield and investigate the effect of structural factors such as thickness, similar...
متن کاملبررسی عوامل موثر بر اثربخشی حفاظ الکترومغناطیسی نانوکامپوزیتی در باند فرکانسی X ا(GHz 5/12-8)
Introduction: Due to the importance of engineering controls for prevention of microwave exposure, this study was conducted to design and constract a novel electromagnetic shielding and also to examine the factors influencing shielding efficacy in X band frequency range. Material and Method: This study used Resin Epoxy as matrix and nano-Nickel Oxide as filler to prepare the composite plates ...
متن کاملElectromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites.
Single-walled carbon nanotube (SWNT)-polymer composites have been fabricated to evaluate the electromagnetic interference (EMI) shielding effectiveness (SE) of SWNTs. Our results indicate that SWNTs can be used as effective lightweight EMI shielding materials. Composites with greater than 20 dB shielding efficiency were obtained easily. EMI SE was tested in the frequency range of 10 MHz to 1.5 ...
متن کاملSimulation of Shielding Effectiveness of Materials using CST Studio
Recently, the development of electronic and electric devices has caused an increase in the level of electromagnetic radiation; therefore, the demand for protection against this danger has increased. There are many ways how to ensure the protection of device against electromagnetic interference; however, this paper is devoted just one of the ways, the shielding. The paper is focused on calculati...
متن کامل