Experimental Study on Solar Energy Storage Using Phase Change Materials in Spherical Shell Storage System

نویسندگان

  • PASAM. BHAGYALAKSHMI
  • K. RAJAN
  • K. R. SENTHIL KUMAR
چکیده

Storing of available energy for later use is a necessity in the present world, one such method is using Phase Change Materials (PCMs). PCMs need a heat transfer medium to transfer the energy from the source to the PCM. In this present work spherical balls are used to store the PCM and water is used as a heat transfer fluid. Paraffin wax (PW) and Palmitic acid (PA) and (4060% PW-PA) eutectic mixture are used as PCMs. The solidification process is carried out in three different ways as cold water, hot water and natural solidification without water. In case of hot water and natural solidification processes the three materials posses the stable reduction. In cold water solidification process base materials have sudden drop in temperature where as the eutectic mixture has gradual change.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage

Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...

متن کامل

Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials

Passive solar systems such as solar chimneys need solar radiation in order to work. Therefore, they cannot present stable natural ventilation when solar energy vanishes: to have a more robust and stable condition, solar energy should be stored during the day and released back during the night. Phase change materials can save additional thermal energy during the day and release it during the...

متن کامل

Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials

Passive solar systems such as solar chimneys need solar radiation in order to work. Therefore, they cannot present stable natural ventilation when solar energy vanishes: to have a more robust and stable condition, solar energy should be stored during the day and released back during the night. Phase change materials can save additional thermal energy during the day and release it during the nig...

متن کامل

Experimental Studies on Phase Change Material-Based Thermal Energy Storage System for Solar Water Heating Applications

Abundantly available solar energy utilization for domestic and industrial applications is hindered because of its intermittent nature. The thermal energy storage (TES) system using both sensible and latent heat has many advantages like large heat storage capacity in a unit volume and its isothermal behavior during the charging and discharging processes. Because of these advantages, in recent ye...

متن کامل

A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses

Abstract Energy crisis is a major challenge in the current world. Latent heat thermal energy storage (LHTES) systems are known as equipment with promising performance by which thermal energy can be recovered. In the present study a comprehensive theoretical and experimental investigation is performed on a LHTES system containing PEG1000 as phase change material (PCM). Discussed topics can be ca...

متن کامل

Microencapsulation of Butyl Palmitate in Polystyrene-co-Methyl Methacrylate Shell for Thermal Energy Storage Application

MicroEncapsulated Phase Change Materials (MEPCM) are green materials which could be used for thermal energy saving applications in buildings as a non-pollutant method for environmental. PCMs could passively reduce peak cooling loads in hot seasons because of their high energy storage capacities at a constant temperature. Purpose of this paper is manufacturing Microencapsulated PCM (MPCM) pr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2018