Modeling on the Breakup of Visco-elastic Liquid for Effervescent Atomization

نویسنده

  • Li-Juan QIAN
چکیده

A primary atomization model for visco-elastic liquid is established based on the ligament formation assumption and dispersion relationships. Two linear instability analyses are used in presented paper. Both of them are involved in the primary atomization model and the calculated results are compared with published experimental data. After validation, the model is used to predict the effects of various operating conditions and visco-elastic liquid physical properties on atomization performance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling of Turbulence Effects on Liquid Jet Atomization

Recent experimental investigations and physical modeling studies have indicated that turbulence behaviors within a liquid jet have considerable effects on the atomization process. For certain flow regimes, it has been observed that the liquid jet surface is highly turbulent. This turbulence characteristic plays a key role on the breakup of the liquid jet near to the injector exit. Other experim...

متن کامل

Modeling of Turbulence Effects on Liquid

Recent experimental investigations and physical modeling studies have indicated that turbulence behaviors within a liquid jet have considerable effects on the atomization process. For certain flow regimes, it has been observed that the liquid jet surface is highly turbulent. This turbulence characteristic plays a key role on the breakup of the liquid jet near to the injector exit. Other experim...

متن کامل

A Computational Approach to the Flow of Walter’s Liquid B′ through Annulus of Coaxial Porous Circular Cylinders for High Suction Parameter (RESEARCH NOTE)

The present investigation studies the behavior of steady flow of visco-elastic liquid between two porous coaxial circular cylinders, where both the cylinders are rotating with different uniform angular velocities about the common axis. In addition, the inner cylinder has uniform velocity along the axis and the visco-elastic fluid, which is a Walters liquid B′, is allowed to flow in the annulus....

متن کامل

Dynamic Analysis of Axially Beam on Visco - Elastic Foundation with Elastic Supports under Moving Load

For dynamic analyses of railway track structures, the algorithm of solution is very important. For estimating the important problems in the railway tracks such as the effects of rail joints, rail supports, rail modeling in the nearness of bridge and other problems, the models of the axially beam model on the elastic foundation can be utilized. For studying the effects of axially beam on the ela...

متن کامل

Effervescent atomizer: influence of the internal geometry on atomization performance

Our work is being conducted with the aim to develop an effervescent atomizer for industrial burners that will generate a fine and stable spray in large turn-down ratio. The single-hole, plain orifice atomizer is powered with light heating oil and uses air as an atomizing medium in the “outside-in” gas injection configuration. Published design concepts of the effervescent atomizer are described....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012