Characterising the Friction and Wear Be- Tween the Piston Ring and Cylinder Liner Based on Acoustic Emission Analysis
نویسندگان
چکیده
The University Repository is a digital collection of the research output of the University, available on Open Access. Copyright and Moral Rights for the items on this site are retained by the individual author and/or other copyright owners. Users may access full items free of charge; copies of full text items generally can be reproduced, displayed or performed and given to third parties in any format or medium for personal research or study, educational or not-for-profit purposes without prior permission or charge, provided:
منابع مشابه
The influence of start-stop transient velocity on the friction and wear behaviour of a hyper-eutectic Al-Si automotive alloy
As worldwide automotive ownership is set to exceed 2 billion vehicles by 2030 [1], environmental and economical pressures on the automotive industry mean there is a trend to reduce harmful greenhouse gas emissions whilst simultaneously improving fuel economy. The use of electrical hybrid, start-stop idling and materials light-weighting are some of the technological solutions which can offer eff...
متن کاملAn Improved Lubrication Model between Piston Rings and Cylinder Liners with Consideration of Liner Dynamic Deformations
The friction pair of piston rings and cylinder liner is one of the most important friction couplings in an internal combustion engine. It influences engine efficiency and service life. Under the excitation of piston slaps, the dynamic deformation of cylinder liner is close to the surface roughness magnitudes, which can affect the friction and lubrication performance between the piston rings and...
متن کاملPiston Ring Friction Analysis from Oil Film Thickness Measurements by
The oil film behavior of a series of fifteen lubricating oils was tested in a single cylinder spark ignition engine. The oil film thickness between the piston and cylinder liner of this engine was observed using the Laser Induced Fluorescence (LIF) technique. The data was examined for correlations between physical properties of the oil and characteristics of the oil film. The region of the oil ...
متن کاملSimulation and Modeling of Friction Force and Oil Film Thickness in Piston Ring – Cylinder Liner Assembly of an I. C. Engine
The piston ring assembly is one of the key parts of internal combustion engine. Its performance decides engine power loss to over come friction force and determines the performance of the whole engine. As per the literature review it is reported 40 to 50 % of the total mechanical friction losses in piston ring cylinder wall interface. The present work mainly focused on study of basic tribologic...
متن کاملThermal analysis of functionally graded materials in cylinders and pistons based on super element method
In the present article, the thermal analysis of the cylinder and the piston in four-cylinder engines, made of functionally graded materials (FGMs), has been performed by using the super element method. The objective of using FGMs in the cylinder and the piston is to increase their performance. FGMs include a combination of ceramics and metals. Inside the cylinder, the ceramic is considered and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015