A numerical procedure for simulating thermal oxidation diffusion of epoxy molding compounds
نویسندگان
چکیده
منابع مشابه
Transfer Molding Encapsulation of Flip Chip Array Packages
Epoxy molding compounds have been developed which can simultaneously underfill and overmold the Flip Chip die in a single transfer molding process. Transfer molding is a well-defined industry process; with suitable mold design, these materials can utilize the currently installed capital base. The ability to apply pressure during the molding process can reduce the void rate under the die as well...
متن کاملEffect of filler concentration of rubbery shear and bulk modulus of molding compounds
In the electronics industry epoxy molding compounds, underfills and adhesives are used for the packaging of electronic components. These materials are applied in liquid form, cured at elevated temperatures and then cooled down to room temperature. During these processing steps residual stresses are built up resulting from both cure and thermal shrinkage. In order to minimize these stresses inor...
متن کاملOptimization of thermal curing cycle for a large epoxy model
Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...
متن کاملFlow Over an Exponentially Stretching Porous Sheet with Cross-diffusion Effects and Convective Thermal Conditions
This article investigates the influence of cross-diffusion on the viscous fluid flow over a porous sheet stretching exponentially by applying the convective thermal conditions. Velocity slip at the boundary is considered. The numerical solutions to the governing equations are evaluated using successive linearisation procedure and Chebyshev collocation method. It is observed from this study that...
متن کاملMaterial Concepts and Processing Methods for Electrical Insulation
Epoxy composites are broadly used as an electrical insulation for the high voltage applications since only such materials can fulfill particular mechanical, thermal, and dielectric requirements. However, properties of the final product are strongly dependent on proper manufacturing process with minimized material failures, as too large shrinkage, voids and cracks. Therefore, application of prop...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Microelectronics Reliability
دوره 55 شماره
صفحات -
تاریخ انتشار 2015