Energy Harvesting Technologies: Thick-Film Piezoelectric Microgenerator
نویسنده
چکیده
منابع مشابه
System Design of a Piezoelectric Mems Energy Harvesting Module Based on Pulsed Mechanical Excitation
In this paper we describe the system design of a piezoelectric MEMS energy harvesting module based on analytical modeling. The application example of a wireless sensor node for tire condition monitoring is considered. Key specifications which are taken into account are the power budget for the system operation, the system mass and the area consumption. System considerations comprise the generat...
متن کاملVibration Energy Harvesting with Pzt Thin Film Micro Device
A micro power generator for harvesting vibration energy by means of a piezoelectric laminated cantilever with inertial mass was designed, fabricated, and characterized. The device was micro machined from a silicon-on-insulator structure coated with a 2μm thick piezoelectric PZT thin film. Interdigitated electrodes (IDE) were applied to achieve higher voltages. A piezoelectric coupling constant ...
متن کاملThick-film Piezoelectric Vibration Harvesting – A HUMS Application
A vibration energy scavenger, manufactured entirely by thick-film construction, has been developed to power autonomous subsystems in an embedded health and useage system. The device is constrained to a 2mm thickness and has been designed for a specific helicopter application. The resulting power output is capable of powering an ‘off-the-shelf’ microcontroller based system.
متن کاملRecent Progress on PZT Based Piezoelectric Energy Harvesting Technologies
Energy harvesting is the most effective way to respond to the energy shortage and to produce sustainable power sources from the surrounding environment. The energy harvesting technology enables scavenging electrical energy from wasted energy sources, which always exist everywhere, such as in heat, fluids, vibrations, etc. In particular, piezoelectric energy harvesting, which uses a direct energ...
متن کاملFabrication and characterization of free-standing thick-film piezoelectric cantilevers for energy harvesting
Research into energy harvesting from ambient vibration sources has attracted great interest over the last few years, largely as a result of advances in the areas of wireless technology and low-power electronics. One of the mechanisms for converting mechanical vibration to electrical energy is the use of piezoelectric materials, typically operating as a cantilever in a bending mode, which genera...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017