Section 8 - Mechanical ConsiderationsBackplane Designer's Guide
ثبت نشده
چکیده
The application and performance requirements of a backplane will define its physical layout and size. When the minimum physical structure requirements are known, the form factor can be selected. Application and performance requirements also help the designer decide if the backplane will be a full custom design, a completely packaged protocol, or some point in between. Performance requirements will also define minimum requirements for chassis or cage, card selection, and backplane connectors.
منابع مشابه
Section 4 - Backplane Design ConsiderationsBackplane Designer's Guide
This section focuses on designing high-performance parallel backplanes, a task that can be extremely complex. To assure high performance and good signal integrity, many issues must be considered during the design process. To a large extent, system requirements will define backplane design, determining if distributed capacitance effects will be present on the backplane. Due to the frequencies of...
متن کاملSection 5 - Backplane Signal ConditioningBackplane Designer's Guide
One of the most important decisions that a backplane designer makes when defining system performance is the selection of the driver integrated circuit (IC) or IC input/output (I/O) technology. To achieve a high level of signal integrity, the physical backplane must be designed with specific signal behavior in mind. The physical backplane includes, but is not limited to, the number of loads, the...
متن کاملDesign Guidline #1 Designer's Guide for Laser Hermetic Sealing Introduction
Precision components or sensors exposed to corrosive conditions, or required to have extreme performance characteristics, are sealed hermetically into special packages. Epoxy glueing, resistance welding, soldering, electron-beam welding, and laser welding are several of the techniques available for sealing these packages. The disadvantage in the use of epoxies is that they do not create a herme...
متن کاملTorsion of Poroelastic Shaft with Hollow Elliptical Section
In this paper torsion of hollow Poroelastic shaft with Elliptical section is developed. Using the boundary equation scheme. It looks for a stress function where satisfied Poisson equation and vanishes on boundary. It also analyzed stress function and warping displacement for the hollow elliptical section in Poroelastic shaft. At the end, the result of elastic and poroelastic shaft in warping di...
متن کاملRing Rolling FE Analysis in The Presence of the Guide Rolls
A new method (thermal spokes) is proposed to simulate the guide rolls in FE analysis of the ring rolling process. So far this method is the only one, capable of calculating guide rolls reaction contact forces related to the stiffness of their adjustment mechanism. The method is simple to use, does not introduce further nonlinearities and could be used in any kind of FE formulations. The method ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002