EM1 associated with inter-board connection for module-on- backplane and stacked-card configurations
نویسنده
چکیده
EM1 associated with inter-board connection was studied through common-mode current measurements and FDTD modeling for stacked-card and module-on-backplane configurations. Three types of connections were investigated experimentally including an open pin field connection, an “ideal” semi-rigid coaxial cable connection, and a production connector. Both microstrip and stripline signal routing on the PCB were investigated. The results indicated signal routing on the PCBs or the inter-board connection can dominate the EM1 process. Several cases of connector geometries were studied using FDTD modeling and good agreement was achieved between the measured and FDTD results.
منابع مشابه
A Strong Partitioning Protocol for VME-based Systems Integration
This paper describes a new technology that can provide a global VME memory management in supporting the need of strong partitioning among multi-processor applications on the VME backplane. The technology allows each VME board to maintain a fault containment region on board level and prohibit fault propagation through the bus. The described techniques do not require any modification in the stand...
متن کاملModular Interconnection System for Optical PCB and Backplane Communication
This paper presents a way of building modular systems with a powerful optical interconnection network. Each module, placed on a Printed Circuit Board (PCB), has a generic optical communication interface with a simple electronic router. Together with optical switching using micro-electromechanical system (MEMS) technology, packet switching over reconfigurable topologies is possible. The intercon...
متن کاملAn Embedded Boundary Scan Test System
This paper describes an application of boundary scan IEEE Std. 1149.1 at system level. It provides the description of the design and the implementation options of a VME boundary scan controller board prototype and the corresponding software. The prototype was designed to use the Module Test and Maintenance (MTM) bus, existing in the VME 64x backplane, to apply the IEEE 1149.1 test vectors to a ...
متن کاملM-TRAN II: metamorphosis from a four-legged walker to a caterpillar
− − We have been developing a self-reconfigurable modular robotic system (M-TRAN) which can make various 3-D configurations and motions. In the second prototype (M-TRAN II), various improvements are integrated in order to realize complicated reconfigurations and versatile whole body motions. Those are a reliable connection/detachment mechanism, on-board multi-computers, high speed inter-module ...
متن کاملSPACEWIRE BACKPLANE WITH HIGH SPEED SPACEFIBRE LINK Session: components Short Paper
SpaceWire Backplane is backplane architecture with SpaceWire interconnect between each modules. In the backplane interconnection system, high speed signals are connected between daughter boards via connecters and a backplane. This reduces harness and improves signal integrity. Also, it is implemented the result that examined to aim for standardization of SpaceWire network topology. In ISC2008, ...
متن کامل