Aging Effects in Suspensions of Silica Particles

نویسندگان

  • Seila Selimovic
  • Yue Hu
چکیده

In our study of the aging phenomena in silica suspensions we immersed precipitated silica particles in methyl-terminated PDMS (silicone oil), mineral oil, and glycerol/water and measured their viscoelastic properties as a function of time. We found that the samples based on silicone oil, initially of a pasty consistence, became fluid-like after a period of about three weeks. Aqueous samples aged much faster than the oily samples. Samples containing mineral oil did not exhibit any changes in viscosity and elasticity. In this paper we discuss a possible mechanism for these aging behaviors. INTRODUCTION Fumed silica forms a viscoelastic gel when suspended in silicone oil and in mineral oil, and these suspensions are widely used as filling compounds for fiber-optic cables [1]. Because these filling compounds provide mechanical support for the optic fibers, their viscoelastic properties are of great interest to researchers. The viscoelastic properties of a gel are determined largely by the interactions between the particles that form the gel, and the chemical environment of these particles plays an important role in these interactions. The surface of native silica particles has a large amount of silanol groups (Si-OH), which are hydrophilic. When immersed in a hydrophobic base fluid, silica particles form a gel network because it is energetically favorable for them to form hydrogen bonds with each other. When immersed in a polar medium, however, molecules from the base fluid form a solvation layer around the silica particles due to hydrogen bonding, preventing silica particles to bond with each other, and the suspension is a viscous fluid [2]. For obvious reasons, the stability of the viscoelastic properties of a fiber-optic cable filling compound over time is also of great importance. Reports on the aging behavior of fumed silica in silicone oil have been mixed. Some suspensions showed no significant aging behavior [1,3], while others softened with time [4,5]. In our study of silica gels, we discovered that suspensions of precipitated silica in silicone oil showed drastic aging behavior, turning from a gel to a fluid in a few weeks. In this paper, we report our preliminary observations of this aging behavior and suggest a possible mechanism for it. For comparison, we also used mineral oil and a glycerol/water mixture as base fluids. EXPERIMENTAL DETAILS The precipitated silica particles Zeodent 165, provided by Huber Engineered Materials, are highly polydisperse and amorphous, with a particle diameter ranging from 10-16 μm . The P7.11.1 Mat. Res. Soc. Symp. Proc. Vol. 790 © 2004 Materials Research Society

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

PAA/PEO comb polymer effects on rheological properties and inter-particle forces in aqueous silica suspensions.

The effects of a poly(acrylic acid) (PAA)-poly(ethylene) (PEO) comb polymer dispersant on the rheological properties and inter-particle forces in aqueous silica suspensions have been studied under varying pH conditions. The comb polymer was found to adsorb more strongly under acidic than basic conditions, indicating that the PAA backbone of the copolymer preferentially adsorbs onto silica surfa...

متن کامل

Aging effects of precipitated silica in poly(dimethylsiloxane)

e report the transformation from gels to viscous fluids within a time period of 101–103 h in ixtures of precipitated silica in silicone oil. Scaling behavior in elastic and viscous moduli versus requency, similar to that reported by Trappe and Weitz Phys. Rev. Lett. 85, 449–452 2000 , has een observed for suspensions of different ages, silica volume fractions, and silicone oil molecular eights;...

متن کامل

Synthesis of monodisperse high-aspect-ratio colloidal silicon and silica rods.

We describe the synthesis and the physical properties of suspensions of colloidal silicon and silica rodlike particles. In addition to pure silicon and pure silica rods, we have also synthesized silicon rods with a silica shell and silica rods with a fluorescent silica layer. Pre-patterned p-type (100) silicon wafers were electrochemically etched in electrolyte solutions containing hydrogen flu...

متن کامل

Investigation of the effects of nano-silica on the properties of concrete in comparison with micro-silica

The effects of adding Nano-Silica particles on the compressive strength and water permeability of concrete and its comparison with that of Micro-Silica were investigated in this work. The effect of combination of Nano- silica and Micro-silica were also studied in this work, which resulted in an increase in compressive strength of concrete in comparison with other concrete specimens tested in th...

متن کامل

Investigation of the effects of nano-silica on the properties of concrete in comparison with micro-silica

The effects of adding Nano-Silica particles on the compressive strength and water permeability of concrete and its comparison with that of Micro-Silica were investigated in this work. The effect of combination of Nano- silica and Micro-silica were also studied in this work, which resulted in an increase in compressive strength of concrete in comparison with other concrete specimens tested in th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004