Improvement of Electrical Performance for Porcelain Insulators Using Silicone Rubber Coating

نویسنده

  • A. Ibrahim
چکیده

This work presents the effect of room temperature vulcanized (RTV) silicone rubber coating on cap and pin type porcelain insulator under ac (50Hz) flashover voltage (KV). Describes experimental results obtained for improvement of porcelain insulator removed from 33kV overhead transmission line at Aswan, Egypt after 28 years of service. Also, this study briefly surveys the environmental contaminated surface of porcelain insulator. The flashover voltage have been measured for insulator under various contaminated materials such as ; (cement – sand – silica fume – phosphate ). This work concluded that RTV silicon rubber coating register good electrical performance under dry, wet and wet with 5% , 10% NaCl conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of Station Post Porcelain Insulators with Room Temperature Vulcanized (RTV) Silicone Rubberr Coatings

(PSERC) is a multi-university Center conducting research on challenges facing the electric power industry and educating the next generation of power engineers. Notice Concerning Copyright Material PSERC members are given permission to copy without fee all or part of this publication for internal use if appropriate attribution is given to this document as the source material. This report is avai...

متن کامل

A Three-Dimensional Analysis of Silicone Rubber Insulators Under Different Environmental Conditions Considering the Corona Rings Effect

Since the insulators of transmission lines are exposed to different environmental conditions, it is important task to study insulators performance under different conditions. In this paper, silicone rubber insulators performance under different environmental conditions including rainy, icy, salt and cement are proposed and exactly is studied. Electric fields (E-fields) and voltage distributions...

متن کامل

Flashover Characteristics of Silicone Rubber Sheets under Various Environmental Conditions

Silicone rubber insulators are replacing the conventional ceramic and porcelain insulators rapidly in power transmission and distribution industry. Very limited field knowledge is available about the performance of silicone rubber insulators in polluted and contaminated environments and therefore need further investigation. A comprehensive analysis of silicone rubber sheets (intended for coatin...

متن کامل

Performance Improvement of the Ceramic Outdoor Insulators Located at Highly Polluted Environment Using Room Temperature Vulcanized Silicone Rubber Coating

Ceramic insulators are widely used in transmission as well as in distribution lines. As outdoor insulators, the ceramic insulators are subjected to environmental stresses. In particular case, the insulators may severe high pollution exposure. Under the polluted condition, high leakage current will flow on the insulator surface and dry band arching may take place. The phenomena may initiate the ...

متن کامل

Effect of Environmental Desert Conditions on the Performance of Hydrophobic Polymer Insulators Surfaces

Polymeric insulators are widely used in newly constructed systems and to replace porcelain and glass insulators in existing power lines due to its improved performance. This paper presents an experimental work, which was carried to evaluate the flashover voltage (kV) of Silicone rubber / Ethylene propylene diene monoemer blends of outdoor insulators. Effect of environmental parameters at desert...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015