Zinc(II) tetraarylporphyrins anchored to TiO2, ZnO, and ZrO2 nanoparticle films through rigid-rod linkers.

نویسندگان

  • Jonathan Rochford
  • Elena Galoppini
چکیده

A series of six Zn(II) tetraphenylporphyrins (ZnTPP), with a phenyl (P) or oligophenyleneethynylene (OPE = (PE) n ) rigid-rod bridge varying in length (9-30 A) and terminated with an isophthalic acid (Ipa) anchoring unit, were prepared as model dyes for the study of sensitization processes on metal oxide semiconductor nanoparticle surfaces (MO(n) = TiO(2), ZnO, and insulating ZrO(2)). The dyes were designed such that the electronic properties of the central porphyrin chromophore remained consistent throughout the series, with the rigid-rod anchoring unit allowing each porphyrin unit to be located at a fixed distance from the metal oxide nanoparticle surface. Electronic communication between the porphyrin and the rigid-rod unit was not desired. Rigid-rod porphyrins ZnTPP-Ipa, ZnTPP-P-Ipa, ZnTPP-PE-Ipa, ZnTPP-(PE)(2)-Ipa, ZnTPP-(PE)(3)-Ipa, and ZnTMP-Ipa (with mesityl substituents on the porphyrin ring) were synthesized using combinations of mixed aldehyde condensations and Pd-catalyzed cross-coupling reactions. Their properties, in solution and bound, were compared with that of Zn(II) 5,10,15,20-tetra(4-carboxyphenyl)porphyrin ( p-ZnTCPP) as the reference compound. Solution UV-vis and steady-state fluorescence spectra for all six rigid-rod-Ipa porphyrins were almost identical to each other and to that of p-ZnTCPP. Cyclic voltammetry and differential pulse voltammetry scans of the methyl ester derivatives of the six rigid-rod-Ipa porphyrins, recorded in dichloromethane/electrolyte, exhibited redox behavior typical of ZnTPP porphyrins, with the first oxidation in the range +0.99 to 1.09 V vs NHE. All six rigid-rod-Ipa porphyrins and p-ZnTCPP were bound to metal oxide (MO(n) = TiO(2), ZnO, and insulating ZrO(2)) nanoparticle films. The Fourier transform infrared attenuated total reflectance spectra of all compounds bound to MO n films showed a broad band at 1553-1560 cm(-1) assigned to the v(CO(2)(-)) asymmetric stretching mode. Splitting of the Soret band into two bands at 411 and 423 nm in the UV-vis spectra of the bound compounds, and broadening and convergence of both fluorescence emission bands in the fluorescence spectra of the porphyrins bound to insulating ZrO(2) were also observed. Such changes were less evident for ZnTMP-Ipa, which has mesityl substituents on the porphyrin ring to prevent aggregation. Steady-state fluorescence emission of rigid-rod-Ipa porphyrins bound to TiO(2) and ZnO through the longest bridges (>14 A) showed residual fluorescence emission, while fluorescence quenching was observed for the shortest compounds.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles

Antibacterial properties of TiO2, ZnO as well as mixed TiO2-ZnO nanoparticles coated low density polyethylene films on Staphylococcus aureus PTCC1112 were investigated. Bactericidal efficiency of 0.5, 1 and 2 Wt% for TiO2 and ZnO nanoparticles and also 1 Wt% mixed TiO2-ZnO nanoparticles with TiO2:ZnO ratios of 25:75, 50:50 and 75:25 were tested under UV and fluorescent lights exposure at two di...

متن کامل

Tetrachelate porphyrin chromophores for metal oxide semiconductor sensitization: effect of the spacer length and anchoring group position.

Four Zn(II)-tetra(carboxyphenyl)porphyrins in solution and bound to metal oxide (TiO2, ZnO, and ZrO2) nanoparticle films were studied to determine the effect of the spacer length and anchoring group position (para or meta) on their binding geometry and photoelectrochemical and photophysical properties. The properties of three types of anchoring groups (COOH and COONHEt3) for four Zn(II)-porphyr...

متن کامل

High Photocatalytic Performance in the Photodegradation of MB Dye of Photocatalytic Efficiency of ZnO/Fe3O4 and TiO2/Fe3O4 Under Visible Light Irradiation

     Zinc Oxide (ZnO) nanorods and titanium dioxide (TiO2) nanostructures thin films were prepared onto glass substrates by the chemical bath deposition (CBD) method. The ZnO was structured as nanorods (NRs) while TiO2 was formed as nanoflowers plate as confirmed by Field-Emission Scanning Electron Microscope (FESEM) images. The ZnO/Fe3O4 and TiO2/Fe3O4 nanostructures thin films were prepared v...

متن کامل

Preparation and characterization of ZnO-TiO2 films obtained by sol-gel method

The sol-gel route has been applied to obtain ZnO-TiO2 thin films. For comparison, pure TiO2 and ZnO films are also prepared from the corresponding solutions. The films are deposited by a spin-coated method on silicon and glass substrates. Their structural and vibrational properties have been studied as a function of the annealing temperatures (400-750 °C). Pure ZnO films crystallize in a wurtzi...

متن کامل

Hierarchically Structured ZnO Film for Dye-Sensitized Solar Cells with Enhanced Energy Conversion Efficiency

The interest in dye-sensitized solar cells has increased due to reduced energy sources and higher energy production costs. For the most part, titania (TiO2) has been the material of choice for dye-sensitized solar cells and so far have shown to exhibit the highest overall light conversion efficiency ∼ 11 %. However, zinc oxide (ZnO) has recently been explored as an alternative material in dye-s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 24 10  شماره 

صفحات  -

تاریخ انتشار 2008