Enhancing glass-forming ability via frustration of nano-clustering in alloys with a high solvent content

نویسندگان

  • H. X. Li
  • J. E. Gao
  • Y. Wu
  • Z. B. Jiao
  • D. Ma
  • A. D. Stoica
  • X. L. Wang
  • Y. Ren
  • M. K. Miller
  • Z. P. Lu
چکیده

The glass-forming ability (GFA) of alloys with a high-solvent content such as soft magnetic Fe-based and Al-based alloys is usually limited due to strong formation of the solvent-based solid solution phase. Herein, we report that the GFA of soft magnetic Fe-based alloys (with >70 at.% Fe to ensure large saturation magnetization) could be dramatically improved by doping with only 0.3 at.% Cu which has a positive enthalpy of mixing with Fe. It was found that an appropriate Cu addition could enhance the liquid phase stability and crystallization resistance by destabilizing the α-Fe nano-clusters due to the necessity to redistribute the Cu atoms. However, excessive Cu doping would stimulate nucleation of the α-Fe nano-clusters due to the repulsive nature between the Fe and Cu atoms, thus deteriorating the GFA. Our findings provide new insights into understanding of glass formation in general.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On the glass forming ability of liquid alloys.

By using the concepts of the short-range order (SRO) and middle-range order (MRO) characterizing structures, an attempt has been made to describe the glass forming ability (GFA) of liquid alloys. This includes the effect of more than two kinds of SRO in the liquid caused by the addition of second and third elements to a metallic solvent. The minimum solute concentration is related to the atomic...

متن کامل

Glassy steel optimized for glass-forming ability and toughness

An alloy development strategy coupled with toughness assessments and ultrasonic measurements is implemented to design a series of iron-based glass-forming alloys that demonstrate improved glass-forming ability and toughness. The combination of good glass-forming ability and high toughness demonstrated by the present alloys is uncommon in Fe-based systems, and is attributed to the ability of the...

متن کامل

Thermodynamic limits of crystallization and the prediction of glass formation tendency

We have calculated the T0 curves for several Al-rare-earth binary alloys to assess the importance of the transport-based resistance to crystallization in the overall glass formation process and the general effectiveness of thermodynamic prediction of glass-forming ability. Our results show that the experimentally observed glass-forming compositions for Al-(Ce, Gd, Ho, Nd, Y, Dy) alloys strongly...

متن کامل

New Pd-Based Bulk Glassy Alloys with High Glass-Forming Ability and Large Supercooled Liquid Region

With the aim of developing a new bulk glassy alloy which can be applied to biomedical applications, we examined glass-forming ability and mechanical properties of Ni-free glassy alloys in Pd50 xPtxCu30P20 system. As a result, the best glass-forming composition is located at Pd35Pt15Cu30P20, and the alloy can be formed into bulk glassy rods with diameters of up to at least 30mm by fluxed water q...

متن کامل

Glass Forming Ability and Corrosion Resistance of Zr-Cu-Ni-Al-Ag Bulk Metallic Glass

Zr70−xCu12.5Ni10Al7.5Agx (x = 0–10) bulk metallic glasses (BMGs) have been prepared by copper mold casting. The glass-forming ability (GFA) and corrosion behavior of Zr-based BMGs have been investigated. It is found that the GFA of Zr-based BMGs first increases and then decreases with the increase of the Ag content, and the best glass former is Zr65Cu12.5Ni10Al7.5Ag5 with the maximum thickness ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 3  شماره 

صفحات  -

تاریخ انتشار 2013