Plasma assisted development of new blood compatible fluorocarbon polymer materials
نویسندگان
چکیده
The various plasma-chemical techniques are used for the surface functionalization and regulation of the biological characteristics of fluorocarbon polymers to enhance their blood compatibility. Modifications of the surface morphology and chemical structure to improve thromboresistive properties of polymers by plasma etching and deposition of biocompatible materials are demonstrated and discussed.
منابع مشابه
Investigations of surface reactions during C2F6 plasma etching of SiO2 with equipment and feature scale models
During fluorocarbon plasma etching of SiO2 , a polymer passivation layer is generally deposited on the surface of the wafer. The polymer layer regulates the etch by limiting the availability of activation energy and reactants, and providing the fuel for removal of oxygen. To investigate these processes, a surface reaction mechanism for fluorocarbon plasma etching of SiO2 has been developed. The...
متن کاملDependence of plasma-induced modification of polymer surfaces on polyatomic ion chemistry
Fluorocarbon plasmas are widely used to chemically modify surfaces and deposit thin films. The deposition of mass selected fluorocarbon ions is useful for isolating the effects specific to polyatomic ions. In this study, the detailed chemical modifications that result from the deposition of beams of polyatomic fluorocarbon ions (C3F5 + and CF3 ) on polystyrene surfaces at experimental fluxes ar...
متن کاملSurface kinetics and plasma equipment model for Si etching by fluorocarbon plasmas
Plasma-surface interactions during plasma etching are important in that, in addition to determining the rate and quality of the etch, they can also influence the properties of the bulk plasma. To address this coupling of bulk and surface processes the surface kinetics model ~SKM! was developed as a module in the two-dimensional hybrid plasma equipment model ~HPEM! with the goal of combining pla...
متن کاملSynthesis of Mesoporous Organosilicate Films in Supercritical Carbon Dioxide
strate for the resist. After spin-coating, the polymer was gently softbaked at 40 °C to evaporate the solvent. The SU-8 was then structured by UV lithography (k= 365 nm) and post-exposure-baked at 40 °C to polymerize the exposed material. Three-dimensional microsystems were achieved by adding further SU-8 layers and repeating the resist processing steps. The microdevices were finally developed ...
متن کاملAn Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes
There is an increasing demand for air-dry performance of fluorocarbon finished materials. Thus, dyeing with different types of reactive, mono, bi, and multi-functional, dyes was evaluated as a novel treatment to create correct surface interface to maintain fluorocarbon performance without ironing or tumble drying. The effects of pre-treatment on fluorocarbon finishing of cotton fabric, a cellul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009