High-Efficiency Isolated Bidirectional Ac–Dc Converter for a Dc Distribution System

نویسنده

  • Chander Rao
چکیده

The isolated bidirectional ac–dc converter is for the 380-V dc power distribution system to control the bidirectional power flow and to improve its power conversion efficiency. Here the high-side switches of the ac– dc rectifier employ IGBTs without anti-parallel diodes and SiC diodes. In addition, the low-side switches are consisting of two MOSFETs to reduce the conduction loss in the rectification mode. PLL system shows lower detection fluctuation and faster transient response than the conventional techniques. And CLLC resonant converter can operate under the ZVS for the primary switches and the soft commutation for the output rectifiers. A dead-band control algorithm for the bidirectional dc–dc converter is developed to smoothly change power conversion directions only using output voltage information.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Operation of Stand Alone PV Generating System for Supplying Unbalanced AC Loads

This paper describes a DC isolated network which is fed with Distributed Generation (DG) from photovoltaic (PV) renewable sources for supplying unbalanced AC loads. The battery energy storage bank has been connected to the DC network via DC/DC converter to control the voltage of the network and optimize the operation of the PV generation units. The PV arrays are connected to the DC network ...

متن کامل

Design and Optimization of an Efficient (96.1%) and Compact (2 kW/dm3) Bidirectional Isolated Single-Phase Dual Active Bridge AC-DC Converter

The growing attention for plug-in electric vehicles, and the associated high-performance demands, have initiated a development trend towards highly efficient and compact on-board battery chargers. These isolated ac–dc converters are most commonly realized using two conversion stages, combining a non-isolated power factor correction (PFC) rectifier with an isolated dc–dc converter. This, however...

متن کامل

Realization of Efficient AC-DC Bidirectional Converter for a DG Application by Using SVPWM

In recent years, a system that makes use of various types of energy has been sought after and the distributed generation system that uses alternative energy such as vehicle power sources like the uninterrupted power system and hybrid electrical vehicles, fuel cells, solar cells and etc. are being studied actively. In these systems, for the greatest efficiency, the control of the charging and di...

متن کامل

Interlink Converter with Linear Quadratic Regulator Based Current Control for Hybrid AC/DC Microgrid

A hybrid alternate current/direct current (AC/DC) microgrid consists of an AC subgrid and a DC subgrid, and the subgrids are connected through the interlink bidirectional AC/DC converter. In the stand-alone operation mode, it is desirable that the interlink bidirectional AC/DC converter manages proportional power sharing between the subgrids by transferring power from the under-loaded subgrid t...

متن کامل

Model Predictive Control of Bidirectional AC-DC Converter for Energy Storage System

Energy storage system has been widely applied in power distribution sectors as well as in renewable energy sources to ensure uninterruptible power supply. This paper presents a model predictive algorithm to control a bidirectional AC-DC converter, which is used in an energy storage system for power transferring between the three-phase AC voltage supply and energy storage devices. This model pre...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015