Improved Porperties of Poly(lactic Acid) with Incorporation of Carbon Hybrid Nanostructure

نویسندگان

  • Junseok Kim
  • Young Teck Kim
  • Scott H. Renneckar
  • Seul Yi Lee
چکیده

Poly(lactic acid) is biodegradable polymer derived from renewable resources and non-toxic, which has become most interested polymer to substitute petroleum-based polymer. However, it has low glass transition temperature and poor gas barrier properties to restrict the application on hot contents packaging and long-term food packaging. The objectives of this research are: (a) to reduce coagulation of graphene oxide/single-walled carbon nanotube (GOCNT) nanocomposite in poly(lactic acid) matrix and (b) to improve mechanical strength and oxygen barrier property, which extend the application of poly(lactic acid). Graphene oxide has been found to have relatively even dispersion in poly(lactic acid) matrix while its own coagulation has become significant draw back for properties of nanocomposite such as gas barrier, mechanical properties and thermo stability as well as crystallinity. Here, single-walled carbon nanotube was hybrid with graphene oxide to reduce irreversible coagulation by preventing van der Waals of graphene oxide. Mass ratio of graphene oxide and carbon nanotube was determined as 3:1 at presenting greatest performance of preventing coagulation. Four different weight percentage of GOCNT nanocomposite, which are 0.05, 0.2, 0.3 and 0.4 weight percent, were composited with poly(lactic acid) by solution blending method. FESEM morphology determined minor coagulation of GOCNT nanocomopsite for different weight percentage composites. Insignificant crystallinity change was observed in DSC and XRD data. At 0.4 weight percent, it prevented most of UV-B light but was least transparent. GOCNT nanocomposite weight percent was linearly related to ultimate tensile strength of nanocomposite film. The greatest ultimate tensile strength was found at 0.4 weight percent which is 175% stronger than neat poly(lactic acid) film. Oxygen barrier property was improved as GOCNT weight percent increased. 66.57% of oxygen transmission rate was reduced at 0.4 weight percent compared to neat poly(lactic acid). The enhanced oxygen barrier property was ascribed to the outstanding impermeability of hybrid structure GOCNT as well as the strong interfacial adhesion of GOCNT and poly(lactic acid) rather than change of crystallinity. Such a small amount of GOCNT nanocomposite improved mechanical strength and oxygen barrier property while there were no significant change of crystallinity and thermal behavior found.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Antimicrobial properties and permeability of Poly lactic Acid nanocomposite films containing Zinc Oxide

Objective(s): Since microbial contamination can reduce the shelf life of the foodstuff and there is a potential for the growth of some pathogen microorganisms, films containing antimicrobial agents were produced, which are also biodegradable. In this study, the effect of 1, 3 and 5% nano-zinc oxide on antimicrobial properties and permeability of poly lactic acid film was invest...

متن کامل

Stem Cell Bone Differentiation on Polyol Lactic Acid Composite Nanoparticles Containing 45S5 Bioactive Glass Nanoparticles

Abstract Background and Objectives Now day, using of stem cells and nanoparticles in the differentiation of stem cells is considered as a therapeutic approach. The purpose of this study was to synthesize and characterize nanocomposite polyacrylic polycarboxylic acid containing nanoparticles of biologically active glass 45S5 crushed and assessment effect of this composite on the propagation and...

متن کامل

Functional Properties of Biodegradable Nanocomposites from Poly Lactic Acid (PLA)

Nanocomposite composed of organoclay(Cloisite 20A-C20A) and Poly lactic acid (PLA) was prepared by solvent casting method. Physical, mechanical, thermal, barrier and microstructure properties of the composite were studied. X-Ray diffraction (XRD) patterns and scannin...

متن کامل

Morphological and mechanical properties of Poly (lactic Acid) /zinc oxide nanocomposite films

Objective(s): Nowadays, tendency to use green materials can reduce environmental pollution and plastic waste. Poly (lactic Acid) PLA is one of the natural biodegradable polymers mainly used in the production of bioplastics for packaging which is made of non-toxic compounds and is easily biodegradable. In this research, the effect of 1, 3 and 5% nanocomposite zinc oxide on the morphological, mec...

متن کامل

Incorporation of 12-Tungstophosphoric acid in Titania spheres and fabrication of core-shell Polyoxotungstate/Titania nanostructures

Core-shell 12-tungstophosphoric acid/TiO2 (HPW/TiO2) nanoparticles at 10 and 20% of HPW have been synthesized by simple in-situ sol- gel method. Characterization of the samples was carried out by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared (FTIR). The X-ray diffraction patterns of as prepared solid samples, indicated characterist...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016