A figure of merit for catheter sampling systems.

نویسندگان

  • H SHERMAN
  • R C SCHLANT
  • W L KRAUS
  • C B MOORE
چکیده

The distortion of indicator dilution curves by catheter sampling systems is predictable from theoretic considerations based on laminar flow. Over a wide range of catheter and flow parameters, deductions can be made regarding distortion, by the arterial system or by sampling catheters, of indicator dilution curves coming from an idealized pump. A figure of merit for the sampling system is given by the volume of the catheter divided by twice the flow rate. This number should be less than the time in which significant changes in indicator concentration occur, i.e., the interval between pump strokes, if significant distortion of the indicator dilution curve is to be avoided.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis and design of a CMOS current reused cascaded distributed amplifier with optimum noise performance

In this paper, analysis, simulation and design of a distributed amplifier (DA) with 0.13µm CMOS technology in the frequency range of 3-40 GHz is presented. Gain cell is a current reused circuit which is optimum in gain, noise figure, bandwidth and also power dissipation. To improve the noise performance in the frequency range of interest, a T-matching low pass filter LC network which is utilize...

متن کامل

Performance comparison of land change modeling techniques for land use projection of arid watersheds

The change of land use/land cover has been known as an imperative force in environmental alteration, especially in arid and semi-arid areas. This research was mainly aimed to assess the validity of two major types of land change modeling techniques via a three dimensional approach in Birjand urban watershed located in an arid climatic region of Iran. Thus, a Markovian approach based on two suit...

متن کامل

Parameters of ZnS/Metal/ZnS nanostructured systems with different metal layers

ZnS/metal/ZnS (ZMZ) nanomultilayer films with Au, Ag and Cu as a metal layer have been deposited on a glass substrate by thermal evaporation and then, were annealed in air at different temperatures from 100 to 300 ºC for one hour. Several analytical tools such as X-ray diffraction, four point probe and spectrophotometer were used to study the changes in structural, electrical and optical proper...

متن کامل

Numerical Modeling of a Nanostructure Gas Sensor Based on Plasmonic Effect

In the present paper, a nanostructure plasmonic gas sensor based on ringresonator structure at the wavelength range of 0.6-0.9 μm is presented. The plasmonicmaterials/SiO2 with the advantage of high mobility and low loss is utilized as a substratefor structure to obtain some appropriate characteristics for the sensing Performanceparameters. To evaluate the proposed senso...

متن کامل

مطالعه تبلور و تاثیر آلاینده ها بر ترکیبات ترموالکتریکی نیمرسانا با فرمول 3(Bi0.25Sb0.75)2Te

The (Bi0.25 Sb0.75)2Te3 compound is a p-type thermoelectric semiconductor for application in thermoelectric cooling systems. To fabricate this single crystal, required elements, Bi, Sb and Te with 5N purity melted in quartz capsule at 10-6 torr pressure and rapidly quenched to room temperature. The sample crystallized by zone melting method with the rate of 8 mm per an hour at 700 oC and for...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Circulation research

دوره 7 3  شماره 

صفحات  -

تاریخ انتشار 1959