Dynamic strength tests for low elongation lanyards.
نویسنده
چکیده
Lanyards are still important and common components of personal systems protecting against falls from a height. Experience with dynamic strength tests of lanyards indicates that test methods based on EN and ISO standards do not make objective assessment possible. This paper presents the results of theoretical and laboratory investigations of the performance of adjustable lanyards during fall arrest. The obtained results indicate that methods of testing and assessment based on those standards demonstrate considerable shortcomings when applied to low elongation lanyards. The assumptions for improved requirements and test methods of lanyards made of, e.g., steel wire and aramid ropes are also presented.
منابع مشابه
Assessment of Fall-Arrest Systems for Scissor Lift Operators: Computer Modeling and Manikin Drop Testing
OBJECTIVE The current study is intended to evaluate the stability of a scissor lift and the performance of various fall-arrest harnesses/lanyards during drop/fall-arrest conditions and to quantify the dynamic loading to the head/ neck caused by fall-arrest forces. BACKGROUND No data exist that establish the efficacy of fall-arrest systems for use on scissor lifts or the injury potential from ...
متن کاملFall Protection Characteristics of Safety Belts and Human Impact Tolerance
Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt1), which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harn...
متن کاملPrediction of Mechanical Properties of TWIP Steels using Artificial Neural Network Modeling
In recent years, great attention has been paid to the development of high manganese austenitic TWIP steels exhibiting high tensile strength and exceptional total elongation. Due to low stacking fault energy (SFE), cross slip becomes more difficult in these steels and mechanical twinning is then the favored deformation mode besides dislocation gliding. Chemical composition along with processing ...
متن کاملتأثیر عملیات حرارتی بر روی خواص مکانیکی و بالستیکی فولاد AISI 4140
The heat treatment process was known as one of the most economical routes for development of the high strength steels. Low alloy AISI4140 steel was also famous for its widespread applications in the automotive and aerospace industries. Thus, a combination of heat treatment procedure and using this type of steel could be the economical and applicable process for various industries. As a result, ...
متن کاملMechanical properties of a high amylose content corn starch based film, gelatinized at low temperature Propriedades mecânicas de filme a base de amido de milho
In the present study, a better knowledge of the influence of plasticizer content, storage relative humidity and film thickness on the mechanical properties of high amylose corn starch based films gelatinized at low temperature, is presented. The mechanical properties, tensile strength and percentage of elongation at break of high amylose corn starch films plasticized with glycerol were evaluate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- International journal of occupational safety and ergonomics : JOSE
دوره 13 1 شماره
صفحات -
تاریخ انتشار 2007