Application of Virtual Surgical Planning with Computer Assisted Design and Manufacturing Technology to Cranio-Maxillofacial Surgery
نویسندگان
چکیده
Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.
منابع مشابه
Recent advances in the reconstruction of cranio-maxillofacial defects using computer-aided design/computer-aided manufacturing
With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in cons...
متن کاملOrthognathic positioning system: intraoperative system to transfer virtual surgical plan to operating field during orthognathic surgery.
PURPOSE To introduce the concept and use of an occlusal-based "orthognathic positioning system" (OPS) to be used during orthognathic surgery. MATERIALS AND METHODS The OPS consists of intraoperative occlusal-based devices that transfer virtual surgical planning to the operating field for repositioning of the osteotomized dentoskeletal segments. The system uses detachable guides connected to a...
متن کاملNew protocol for three-dimensional surgical planning and CAD/CAM splint generation in orthognathic surgery: an in vitro and in vivo study.
Inaccurate visualization of the inter-occlusal relationship has raised an important challenge to virtual planning for orthognathic surgery based on cone beam computerized tomography (CBCT). The aim of this study was to evaluate an innovative workflow for orthognathic surgery planning and surgical splint fabrication. The clinical protocol consists of a single cone beam computerized tomography (C...
متن کاملSurgical navigation in cranio-maxillofacial surgery
Introduction Surgical navigation is well-established in today’s cranio-maxillofacial surgery. However, it is often associated with extra effort for both patient and surgeon and with additional exposure to radiation due to necessary extra imaging. The cranio-orbitofacial structures are challenging with respect to accurate three-dimensional (3D) reconstruction. A virtual plan based on mirrored pa...
متن کاملAccuracy of secondary maxillofacial reconstruction with prefabricated fibula grafts using 3D planning and guided reconstruction.
BACKGROUND We compared the pre-operative 3D-surgical plan with the surgical outcome of complex two-stage secondary reconstruction of maxillofacial defects using inserted implants in the prefabricated fibula graft. METHODS Eleven reconstructions of maxillofacial defects with prefabricated fibulas were performed using a 3D virtual planning. Accuracy of placement of the fibula grafts and dental ...
متن کامل