Turning an organic semiconductor into a low-resistance material by ion implantation

نویسندگان

  • Beatrice Fraboni
  • Alessandra Scidà
  • Piero Cosseddu
  • Yongqiang Wang
  • Michael Nastasi
  • Silvia Milita
  • Annalisa Bonfiglio
چکیده

We report on the effects of low energy ion implantation on thin films of pentacene, carried out to investigate the efficacy of this process in the fabrication of organic electronic devices. Two different ions, Ne and N, have been implanted and compared, to assess the effects of different reactivity within the hydrocarbon matrix. Strong modification of the electrical conductivity, stable in time, is observed following ion implantation. This effect is significantly larger for N implants (up to six orders of magnitude), which are shown to introduce stable charged species within the hydrocarbon matrix, not only damage as is the case for Ne implants. Fully operational pentacene thin film transistors have also been implanted and we show how a controlled N ion implantation process can induce stable modifications in the threshold voltage, without affecting the device performance.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Polymer PN Junction by low Energy Double Implantation Technique

721 Abstract— Polymer base organic PN junction with various ion types was studied. Low-energy ion implantation technique(~keV) is very useful in physical doping on PPP(Polyparaphenylene) polymer. By double implantation, effective organic PN junction was achieved. The best obtained electrical I-V property was rectification ratio which was about 10000. However, still have problems in low junction...

متن کامل

Influence of nitrogen ion implantation on the nanostructure and corrosivity of Ni/stainless steel substrates

Ion implantation is a surface modification technology to produce new material on the surface by impingement of high energy ions from the ion accelerator. In this work, AISI 304 stainless steels were coated with 90 nm Ni film by electron beam deposition and implanted by a flow of 5×1017 N cm−2 at 400 K temperature with different implantation energies of 10, 20, 30 and 40 keV. The prepared sample...

متن کامل

Ultrafast and Highly Sensitive Photodetectors Fabricated on High-Energy-NitrogenImplanted GaAs

192 LLE Review, Volume 95 An ion-implantation technique has been employed in the GaAs photodetector technology to obtain materials with a carrier lifetime in the picosecond and even subpicosecond regimes. Properties of proton,1 Ar+,2,3 As+,4–6 and other ion-implanted GaAs have been investigated thoroughly. Nitrogen-ion–implanted GaAs (N+-GaAs) is a relatively new member in the family of ion-imp...

متن کامل

A Focused Ion Beam Specimen Preparation Method to Minimize Gallium Ion Concentration in Copper Atom-Probe Tomography Specimen Tips

Atom-probe tomography (APT) is a quantitative technique that permits three-dimensional (3-D) spectroscopic characterization of interfaces and other nanometer-scale features within a material. Specimens for atom-probe tomography (APT) analysis of semiconductor devices and nanostructured materials are typically fabricated employing a focused ion beam (FIB) instrument [1 3] or a dual-beam FIB inst...

متن کامل

High",energy (56 MeV) oxygen implantation in Si, GaAs, and InP

The depth profiles measured by secondary-ion mass spectrometry of 56 MeV oxygen ions implanted into Si, GaAs, and InP are reported. Most of the oxygen is contained within a sharp (full wi.dth at half maximum -211m) non-Gaussian profile centered at Jlm in GaAs, 36 }lm in InP, and 46 {-lm in Si, with the distribution skewed towards greater depths. The experimental projected ranges appear to be 10...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 16  شماره 

صفحات  -

تاریخ انتشار 2015