Capacitance Position Sensor for LISA Noise Measurement
نویسنده
چکیده
This paper discusses two techniques investigated for use in a capacitance-based position sensor for the Eöt-Wash LISA noise measurement. The advantages and disadvantages of both techniques are reviewed and some elementary mathematical analysis is presented. A prototype implementation based on the more successful of the two techniques has been constructed.
منابع مشابه
A micromachined capacitive incremental position sensor: part 1. Analysis and simulations
Part 1 of this two-part paper describes the analysis and 2D finite element (FE) simulations for a capacitive incremental position sensor for nanopositioning of microactuator systems with a displacement range of 100 μm or more. Two related concepts for a capacitive incremental position sensor are presented. In an incremental capacitance measurement mode (ICMM), the periodic change in capacitance...
متن کاملAnalysis of Micromachined Capacitive Incremental Position Sensor
This article presents an analysis for two related concepts of a capacitive incremental position sensor. In Incremental Capacitance Measurement Mode the periodic change in capacitance is measured to determine the relative displacement between two periodic geometries S1 and S2 with gap-distance of ~ 1 μm. In Constant Capacitance Measurement Mode the distance between S1 and S2 is controlled to k...
متن کاملThe Effects of Excitation Signal on the Resolution of the Liquid Crystal Capacitive Chemical and Biological Sensors
In this paper excitation characteristics of the Liquid Crystal (LC) capacitive chemical and biological sensor are examined and the optimum frequency and voltage range for the sensor interface are introduced. Interdigitated capacitor has been used for the sensor capacitance measurement and two different molecular orientations, homeotropic and homogenous, have been considered. The LC sensor capac...
متن کاملImprovement of position measurement for 6R robot using magnetic encoder AS5045
Recording the variation of joint angles as a feedback to the control unit is frequent in articulated arms. In this paper, magnetic sensor AS5045, which is a contactless encoder, is employed to measure joint angles of 6R robot and the performance of that is examined. The sensor has a low volume, two digital outputs and provides a high resolution measurement for users; furthermore its zero positi...
متن کامل- qc / 0 41 21 03 v 1 2 1 D ec 2 00 4 Characterization of disturbance sources for LISA : torsion pendulum results
A torsion pendulum allows ground-based investigation of the purity of free-fall for the LISA test masses inside their capacitive position sensor. This paper presents recent improvements in our torsion pendulum facility that have both increased the pendulum sensitivity and allowed detailed characterization of several important sources of acceleration noise for the LISA test masses. We discuss he...
متن کامل