Additive Manufacturing of Functional Constructs under Process Uncertainty

A major challenge in tissue engineering is the generation of cell-seeded implants with structures that mimic native tissue, both in anatomic geometries and intratissue cell distributions. By combining the strengths of injection molding tissue engineering with those of Solid Freeform Fabrication (SFF), three-dimensional preseeded implants were fabricated without custom-tooling, enabling efficient production of patient-specific implants. The incorporation of SFF technology also enabled the fabrication of geometrically complex, multiple-material implants with spatially heterogeneous properties that would otherwise be challenging to produce. Utilizing a custom-built robotic SFF platform and gel deposition tools, alginate hydrogel was used with calcium sulfate as a crosslinking agent to produce pre-seeded living implants of arbitrary geometries. The process was determined to be sterile and viable at 94±5%. The GAG and hydroxyproline production was found to be similar to that of other implants fabricated using the same materials with different shaping methods. The geometric fidelity of the process was quantified by using the printing platform as a Computerized Measurement Machine (CMM); the RMS surface roughness of printed samples in the z-dimension was found to be 0.16±0.02 mm. INTRODUCTION A major challenge in tissue engineering is the generation of cell-seeded implants with structures that mimic native tissue, both in anatomic geometries and * Daniel L. Cohen, Evan Malone, Hod Lipson, Lawrence J. Bonassar; Cornell University, Mechanical and Aerospace Engineering, Ithaca NY; Cornell University, Computing and Information Science, Ithaca NY; Cornell University, Biomedical Engineering, Ithaca NY.