Finding Opens with Optics
نویسنده
چکیده
As circuit densities continue their increase, Automated Optical Inspection (AOI) augments traditional test methods for assuring quality of electronic assemblies. AOI is particularly helpful in assembly lines where both sides of a board are reflowed. This most modern style of construction leads to products of unprecedented density, but also brings us difficulties with in-circuit fixturing. The loss of in-circuit fixturing has the potential to bring us products of greater cost and inferior quality.
منابع مشابه
Lhc Optics with Crab-waist Collisions and Local Chromatic Correction
We report the status of the optics design for a local chromatic correction with extremely flat beams at the LHC. Together with a Large Piwinski angle, this optics opens up the possibility of crab-waist collisions at the LHC, for which a new layout of the LHC insertion region (IR) is needed. We present a complete optics, and discuss the parameters of the final “double-half” quadrupole.
متن کاملMeasurement of the Earth’s Magnetic Field Vector based on zero field finding algorithm using optically pumped magnetometers
Atomic magnetometers have found widespread applications in precise measurement of the Earth’s magnetic field due to their high sensitivity. In these measurements, various methods have been utilized to compensate the Earth’s magnetic field in an unshielded environment. In this paper, we have proposed a method based on finding the minimum resonance frequency (corresponding to minimum magnetic fie...
متن کاملRealization of fiber-based laser Doppler vibrometer with serrodyne frequency shifting.
We demonstrate a laser Doppler vibrometer (LDV) based on the serrodyne frequency shifting technique. A proof-of-principle system is implemented on the basis of fiber-optic components but opens the way toward an ultracompact integrated LDV system on a silicon chip. With a low laser power of 50 μW, the serrodyne LDV was able to measure submicrometer vibrations with frequencies in the audio range.
متن کاملX-ray resonance in crystal cavities: realization of Fabry-Perot resonator for hard x rays.
X-ray back diffraction from monolithic two silicon crystal plates of 25-150 microm thickness and a 40-150 microm gap using synchrotron radiation of energy resolution DeltaE = 0.36 meV at 14.4388 keV clearly show resonance fringes inside the energy gap and the total-reflection range for the (12 4 0) reflection. This cavity resonance results from the coherent interaction between the x-ray wave fi...
متن کاملPolarimetric calibration of large-aperture telescopes. I. Beam-expansion method.
A concept is described for the high-accuracy absolute calibration of the instrumental polarization introduced by the primary mirror of a large-aperture telescope. This procedure requires a small aperture with polarization-calibration optics (e.g., mounted on the dome) followed by a lens that opens the beam to illuminate the entire surface of the mirror. The Jones matrix corresponding to this ca...
متن کامل