On the Simulation of Soft Finger Contact Model with Rolling in Haptics
نویسندگان
چکیده
Computation of contact point trajectories and forces exchanged between two bodies in contact are relevant to several disciplines. The solutions proposed in the literature are often too complex to be implemented in real time simulations, especially if rolling effects are considered. In this paper an algorithm for fast simulation of soft-finger contact model with rolling effects is proposed. The main idea is to use Euler angle decomposition algorithm to quantitatively describe the torque exchanged about the normal at the contact point and the motion of the contact point due to rolling. The proposed algorithm is validated with simulations and a preliminary application to Haptics is proposed. This approach has been exploited in haptic rendering, but can be easily extended to other applications requiring real-time computation, e. g. multi-body modelling of robotic hand grasps.
منابع مشابه
Simulation of Soft Finger Contact Model with Rolling Effects in Point-Contact Haptic Interfaces
Computation of contact point trajectories and forces exchanged between two bodies in contact are relevant to several disciplines. The solutions proposed in the literature are often too complex to be implemented in real time simulations, especially if rolling effects are considered. In this chapter, an algorithm for fast simulation of softfinger contact model with rolling effects is proposed. Th...
متن کاملInvestigation and Simulation of Wire Non-Asymmetric Rolling Process
The non-asymmetric rolling process of copper and brass wire has been simulated with the Abaqus software. Presented finite element model in this simulation of rolling predicted output curvature and contact surface width in the non-asymmetric mode (in equality of diameter of rollers, the rotational speed of the rollers and the rollers’ surface finish). The material used in this research has strai...
متن کاملAccuracy of Discrete Element Method Simulations: Rolling and Sliding Frictions Effects-Case study: Iron Ore Pellets
The discrete element method (DEM) has been used as a popular simulation method in order to verify the designs by visualizing how materials flow through complex equipment geometries. Although DEM simulation is a powerful design tool, finding a DEM model that includes all real material properties is not computationally feasible. In order to obtain more realistic results, particle energy loss du...
متن کاملAnalysis of Rolling Process for Clad Sheet Using the Modified Slab Method
In this paper, an analytical model based on Modified Slab Method is presented for rolling of clad sheet or double-layers in which the two layers are bounded prior to rolling. This model considers the general case of asymmetrical rolling due to unequal 
surface speed, different contact friction, roll diameters, flow stress, and thickness ratios of the two layers. Using this model, rolling par...
متن کاملAnalysis of Rolling Process for Clad Sheet Using the Modified Slab Method
In this paper, an analytical model based on Modified Slab Method is presented for rolling of clad sheet or double-layers in which the two layers are bounded prior to rolling. This model considers the general case of asymmetrical rolling due to unequal surface speed, different contact friction, roll diameters, flow stress, and thickness ratios of the two layers. Using this model, rolling param...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012