A Design of CMOS Broadband Amplifier With High-Q Active Inductor
نویسندگان
چکیده
A CMOS broadband amplifier with high-Q active inductor using 0.25um CMOS process is presented. In this broadband amplifier, the compact high-Q active inductor is connected to the common-gate configuration to improve the performance of the high power gain, wide bandwidth, low power consumption and simple matching characteristics. Not using any passive inductor components is to be reduced the area of chip and the complexity. Advance Design System (ADS) simulator has been performed to verify the performance of the designed broadband amplifier. It has been shown that the amplifier has a 20dB(S21) power gain in -3dB bandwidth, S11 of -17dB, S22 of –21dB and noise figure (NF) of 8dB, under 2.5V power supply with 18mW power consumption.
منابع مشابه
A Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملA Radio Frequency CMOS Band Pass Amplifier Using High-Q Active Inductor Loads with Binary Code for Multi-Band Selecting
In this paper, a CMOS radio frequency (RF) multi-band band-pass amplifier using a high-Q active inductor load with a binary code band selector suitable for multi-standards wireless applications is proposed. By employing the improved high-Q active inductor including two bits binary controlled code, the RF multi-band amplifier operating at four different frequency bands is realized. The proposed ...
متن کاملA CMOS Multi-band Low Noise Amplifier Using High-Q Active Inductors
In this paper, a CMOS Multi-band LNA using High-Q active inductors load with a binary code band selector suitable for multi-standards wireless applications is proposed. Using an improved high-Q active inductor including two bits binary controlled code, the multi-band low noise amplifier operating at four different frequency bands is realized. The proposed amplifier is designed in TSMC 0.18-um C...
متن کاملA Tunable Inductor with Enhanced-Q based on CMOS Transconductance and its RF applications
This paper describes the Q enhancement of inductor or resonance circuit based on the controlled CMOS transonductance, which is applicable to either on-chip inductor or off-chip inductor. The proposed circuit configuration of high Q enhancement is evaluated for the RF transmit filter of a LTE mobile comm’s micro base station, with the Q factor of over 3000 and the capacity of 10W. A tunable filt...
متن کاملLow Power Amplifier Design Using CMOS Active Inductor
In this paper, a CMOS low power amplifier based on a high-quality active inductor and implemented by using 0.25-μm 1P5M CMOS standard technology is presented. The amplifier achieves power gain (S21) of 18dB within the -3dB cutoff frequency, bandwidth of 1.3GHz, and power consumption of 18mW under 2.5V power supply in 188 × 174μm silicon area. The input third-order intercept point (IIP3) and the...
متن کامل