Accurate Rotor Position Detection and Sensorless Control of SRM for Super-High Speed Operation
نویسندگان
چکیده
Based on the general nonlinear magnetizing model (GNMM) from our previous research work, an improved method of detecting rotor position for sensorless control of SRMs in super-high speed operation has been developed. With minimum input data, the approximated GNMM is obtained and the rotor speed estimated. Then the rotor position is detected by the motion equation. To remove rotor position error, the proposed scheme updates the reference at critical points using the flux observation. Further, the GNMM is adaptively tuned based on the updated information. The improved rotor position detection method has been implemented by fully exploring the computation power of the modern DSP. Laboratory verification on different types of SRMs with sensorless control up to 20,000 rpm is accomplished.
منابع مشابه
Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor
In the presented paper, a sensorless driver circuit is designed, constructed and tested to control two types of three-phase Switched Reluctance Motor (SRM). The presented control algorithm has three steps. In the first step, the SRM is controlled by an open-loop method. In the second step, mathematical model of the SRM phase, motor parameters and flux-current-rotor position relation are used in...
متن کاملSensorless Speed Control of Switched Reluctance Motor Drive Using the Binary Observer with Online Flux-Linkage Estimation
An adaptive online flux-linkage estimation method for the sensorless control of switched reluctance motor (SRM) drive is presented in this paper. Sensorless operation is achieved through a binary observer based algorithm. In order to avoid using the look up tables of motor characteristics, which makes the system, depends on motor parameters, an adaptive identification algorithm is used to estim...
متن کاملApplication of a Sliding Mode Observer for Sensorless Operation of Switched Reluctance Motors
Purpose – The purpose of this work is to applicate a sliding mode observer for sensorless control of switched reluctance motor (SRM) drive Design/methodology/approach – This paper presents an evaluation of the sliding-mode observer to estimate the SRM speed and rotor position. Non-linear model of a SRM is used and a computer simulation is developed based on data from an experimental motor syste...
متن کاملTorque and Reactive Power Control of a Doubly-Fed Induction Machine by Position Sensorless Scheme
Doubly fed wound rotor induction machine with vector control is very attractive to the high performance, variable speed drive and generating applications[ 1-31. In variable speed drive application, the so-called slip power recovering scheme is a common practice where the power due to the rotor slip belowlabove synchronous speed is recovered to/supplied from the power source, resulting a high ef...
متن کاملAdaptive Neuro Fuzzy Inference System Based Sensorless Rotor Position Estimation of Srm
This paper presents sensorless rotor position estimation of Switched Reluctance Motor (SRM) where the position is to be determined by Adaptive Neuro Fuzzy Inference System (ANFIS). The rotor position sensing is very essential for the SRM for its efficient operation. Previously rotor position sensors are used to estimate the position of rotor for SRM. Due to its drawback the sensors have to be r...
متن کامل